need rear end lifted

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • omarsvette
    Registered Member
    • Nov 2013
    • 1

    need rear end lifted

    hello im semi new to tri five owner ship. my first was a 55 that i sold befor i could complete it. but i bought a 56 gasser in running condition. my problem is that i bought a wheel set but need to raise the rear to make these wheels fit. it has a 12 bolt with leaf springs no shocks. i have shackles but when i moved it to the bottom hole in hope to raise the rear i still didnt have enough clearance. actually the spring started to bend. so i figure bad springs. i was advised to just add air shocks to raise it. is this a good idea??
  • NickP
    Registered Member
    • Mar 2012
    • 4158

    #2
    Welcome aboard! I would not consider air shocks

    Comment

    • Run-em
      Registered Member
      • Mar 2012
      • 652

      #3
      Back in the old days, we resorted to 4 X 6 chunks of wood. Don't think that will solve your problems though. Nix on the air shocks also as they are notorious for suddenly loosing air & dropping the body onto the tires.

      Comment

      • carls 56 (RIP 11/24/2021)
        Registered Member
        • Jan 2011
        • 1857

        #4
        hi Omar and welcome. good to have you here. maybe try www.summitracing.com.
        ARMY NAM VET, very proud!

        56 210 4dr

        drive and enjoy them while you work on them, life is to short.

        Comment

        • warren57
          Registered Member
          • Jul 2012
          • 569

          #5
          Air shocks worked, but ride was rough and need to watch the trunk mounting holes, they won't take to much abuse. Better to use springs arched to raise the rear. I once moved the housing from above the springs, to below, but that was way to high!!

          Comment

          Working...