View Full Version : CPP Master Cylinder???
NEW MCPV-1
http://www.classicperform.com/NewProducts/MCPV-1/CP31500-C.jpg
Anybody install one of these? Any comments?
Bihili
12-05-2013, 01:59 PM
Yep. I had a Ebay made in china master cylinder. The cylinder was scored and it took me a long time to figure out my problem.
I bought a CPP Master Cylinder and now everything is AOK. Just follow their instructions:
http://www.classicperform.com/TechBook/BrakeTroubleshoot.htm
Right now have disc/drums, wonder if the residual valve can be removed when going to disc/disc? Thanks for the reply.
Rick_L
12-06-2013, 01:24 PM
Yes, the residual valve not just can but should be removed with disc/disc.
You use a 10 psi residual valve with drum brakes, and you use a 2 psi residual valve with discs if the master cylinder is below the caliper, such as when you have a frame mounted master cylinder, like on a truck or street rod.
Rick its mounted in the stock location. Its for that Versailles rear end that I have yet to install!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.