PDA

View Full Version : Deluxe Heater Control Assembly



lovemy55
09-18-2014, 08:40 AM
Can someone help me with any tips and tricks as to how to remove the deluxe heater controls assembly from the dash of a 1955 Bel Air

Thanks in advance

567chevys
09-18-2014, 09:30 AM
Hello Lovemy55 ,
There are 2 screws at the top of the control that clamp it to the dash from the back. You can see 1 of them in line with the on/off switch in the drawing in the Library 55 chevy Manual Page 172 You may have to take the glove box and ash tray out, to get to them.there is also 2 screws at the bottom remove them and it should drop down





Sid

lovemy55
09-18-2014, 10:54 AM
Hello Lovemy55 ,
There are 2 screws at the top of the control that clamp it to the dash from the back. You can see 1 of them in line with the on/off switch in the drawing in the Library 55 chevy Manual Page 172 You may have to take the glove box and ash tray out, to get to them.there is also 2 screws at the bottom remove them and it should drop down





Sid
Thanks, Sid. I will take a look. I figured that more would have to be taken apart than just the control itself.

Dave

567chevys
09-18-2014, 11:29 AM
Hello Dave,

Here are 3 Pictures , shows you where the screws are .

Thanks Sid