Aftermarket Injectors

[markm]

I am helping a friend out with his car which is a tuned port 350 that has been bored & stroked to 383, the cam is a hyd roller and Vortec heads. The car has sat for 5 years and the fuel system is trashed. Question who makes a good aftermarket injector 22-24 pound. Has Accel in it now. looking at AFIS, Fast & Edelbrock.

[Rick_L]

My first thought is that any of them should be fine, especially for this application.

All of those are probably re-branded OEM replacement.

[chevynut]

I'm surprised you don't try to clean them yourself. :)

https://www.youtube.com/watch?v=_NMM6Mk79rg

Look on eBay if you want new ones. They have new ones pretty cheap.

[Fladiver64]

I used a similar method the cnut's you tube video on my dad's 34, which has a a 92 LT1 in it. Car has sat for several years, needed fuel pump, new fuel lines and cleaned the injectors. I ran a couple of tanks of injector cleaner after and she runs like new.

[markm]

Ordered Accel ones from Jegs will be here Friday. This car is an original 350 IROC with the Aussie built 9 bolt rear and runs 13.00 in 1/4 getting 20 mpg getting there.