PDA

View Full Version : 1956 stock AM radio bracket mount location?



jollyold
04-29-2017, 09:03 AM
Hello.I have a stock AM 56 chevy radio and new mounting bracket to go into my 56 chevy 210.It says to mount brace to plenum chamber bracket??I cant see any brackets on heater assembly or defroster duct and would like to know if anyone has any pics showing how and where this bracket goes from the radio..Thank you

LEE T
04-29-2017, 10:04 AM
The original radio bracket bolted to the largest bolt on speaker grill. There are three small bolts and one larger.
If you bought a bracket, it may not bolt up the same way.

jollyold
04-29-2017, 03:18 PM
Ummmm....O.K..I looked at my speaker grill and it has 2 small studs on the bottom and a place for 2 screws that screw into bottom side of dash.Nothing like you are describing.Any one have pics?The instructions show a bracket on a"plenum chamber"The bracket or "hanger brace"that I have is pictured on instructions but it just does not make sense and this radio is HEAVY.I need to know before I shove this beast up in there.HELP.Thanks

LEE T
04-29-2017, 05:18 PM
oops, sorry I was thinking about 57