TriChrome
03-06-2018, 11:56 PM
From: BOB FORD [BOB_FORD@compuserve.com]
Sent: Saturday, December 30, 2000 7:51 AM
To: Blind.Copy.Receiver@compuserve.com
Subject: 57-56-55 CHEVY LISTL
THIS IS THE 57-56-55 CHEVY LIST
THIS LIST IS DESIGNED AS A MEANS FOR PEOPLE INTERESTED IN THE 1955, 1956,
AND 1957 CHEVROLETS TO COMMUNICATE WITH EACH OTHER. ALL OPINIONS
ARE WELCOME.
TO POST SOMETHING ON THIS LIST PLEASE E-MAIL YOUR POST TO
BOB_FORD@COMPUSERVE.COM
THERE IS NO COST TO BECOME A LIST MEMBER AND ONLY LIST MEMBERS ARE
ALLOWED TO POST SOMETHING ON THE LIST.
THIS 57-56-55 CHEVY LIST IS NOT SENT OUT ON ANY SET SCHEDULE SO IF YOU
WANT TO POST SOMETHING THAT CONTAINS A DATE, PLEASE SEND IT IN EARLY
SO I CAN GET IT OUT TO THE LIST MEMBERS BEFORE THE DATE OF THE EVENT.
PLEASE INCLUDE YOUR CITY AND STATE WITH YOUR POSTS. IF YOU ARE
POSTING SOMETHING FOR SALE PLEASE ALSO INCLUDE
1. YOUR PHONE NUMBER
2 THE PRICE
3. WHEN YOU WILL BE AT YOUR PHONE NUMBER AND YOUR TIME ZONE.
TAKE AS MUCH SPACE AS YOU WANT AND FULLY DESCRIBE WHAT YOU HAVE
FOR SALE OR WANT TO BUY.
YOUR COMMENTS ABOUT THIS LIST ARE WELCOME.
IF YOU WANT TO SEND ME E-MAIL THAT YOU DO NOT WANT ON THE LIST
PLEASE PUT "PRIVATE NOT FOR THE LIST' AS THE SUBJECT.
THE OPINIONS EXPRESSED IN THIS LIST ARE THE MEMBERS OPINIONS AND NOT
NECESSARILY MINE.
THANKS
BOB FORD
EDITOR
__________________________________________________ ____________________
To: [unknown], BOB_FORD
From: INTERNET:OvalRace25@aol.com, INTERNET:OvalRace25@aol.com
Napa, CA
55 Chevy WANTED. Must be a RED Sedan, Big Block, manual trans, stock
styling
and trim, original style interior AND Must BE completely show quality
"frame
off" in every nook and cranny. Must be street legal and tame enough to
drive
cross country on power tour but set ya back in the seat when you stab it a
little. I am looking for the best car out there!
R Dahlgren
rdahlgren@aol.com
---------------------------------------------------------------------------
---------------
To: [unknown], BOB_FORD
From: "Jeff Wilson", INTERNET:jwilson@unctv.org
Bob- please post to the list if one goes out before New Years.
Just a thought for those of you who (like me) think the
REAL millennium begins THIS new years eve....
Consider going out just before midnite and driving your
Classic Chevy "into the new millennium"....
CJ Wilson
------------------------------------------------
To: BOB FORD, BOB_FORD
From: John Bresnik, INTERNET:bresnik@home.com
Dear Bob,
These prices are unrealistic -- very few people will pay $40,000 and up for
these Chevys unless they're rich. What happened to the $10-15,000 range?
John Bresnik
Escondido, CA
Editor's note. There has been some very expensive cars listed. If you
have a car for sale please send it in. My guess is that cheaper cars sell
faster than expensive ones. List members, what are your feelings about
seeing expensive cars for sale?
BOB
---------------------------------------------------------------------------
---------------------
To: [unknown], BOB_FORD
From: "Mike Nolan", INTERNET:mpnolan@gte.net
Bob,
I heard that you can put GM S10 or S15 small truck disc brakes an my 57
Chevy using the original front spindles.
My questions to the group are:
What year?
What wheel bearings?
What dust covers are used?
What brackets hold the calipers?
I have a 57 210 Townsman Wagon.
Thanks,
Mike Nolan
St. Peters Mo.
---------------------------------------------
To: "Bob Ford", BOB_FORD
From: "Edward Shockley", INTERNET:drshock@insectria.net
Bob,
I received a letter from the historical folks at A.O. Smith yesterday. It
was confirmed that A.O. Smith made all the two piece frames for Chevrolet.
The one piece designs were made by Chevrolet themselves at some plants.
The A.O. Smith frames were shipped from one of two plants directly to the
Chevrolet plants for final assembly (specific bracket welding). This was
the setup as far back as 1954 and thru 1958. A.O. Smith made all the
frames
for the Corvette during these years.
I did receive some other information from a separate source that says, at
least after 1958, that Budd also made one piece frames for Chevrolet along
Chevrolet making some of their own one piece design and with A.O. Smith
still making the two piece frames. So three frame suppliers in the
1958-1964 years it would seem. This information is from Chevrolet in
1964.
Pretty interesting.
Edward D. Shockley
-------------------------------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Leonardjohn@firestoneindustrial.com,
FOR READING ENTERTAINMENT ONLY...............
"There are 987 Chevy bowties on a 55 Bel Air's dash trim plates." Gee my
eyes are strained. Just kidding. I read it in a publication I have had
for a long time. Just a bit of trivia not many people know. Thought you'd
get a laugh that someone did actually count them. No, I didn't verify this
info.
-----------------------------------------------------------
To: [unknown], BOB_FORD
From: Lynn Mark Sims, INTERNET:lsims88usa@pipeline.com
Happy Holidays!...for Richard and all readers,
I consulted my "vast library"
of 50's videotaped movies and, yes indeed, there
IS a movie with the official opening credit
title "Rock Around the Clock" featuring Bill
Haley and the Comets...the movie is in black
and white and is part of the fabulous Alan Freed
series of rock'n'roll performances thinly
concealed as teenage movies which were released
in the Fifties...the only notable group
included in this one appears to be The
Platters but does have one of my fave '50's actresses,
Lisa Gaye!...watch for Rock retrospective marathons
which is where I taped the Alan Freed series
which I recommend to all fans of the birth of
Rock & Roll!....'57 Chevys Forever! and a groovy
2001 to all...Lynn and Milly Sims
------------------------------------------------------
To: [unknown], [74353,2064]
From: INTERNET:esurfer@mindspring.com, INTERNET:esurfer@mindspring.com
I have a '69 Camaro CHERRY to trade if interested..Hot rod.
esurfer@mindspring.com
-----------------------------------------
To: [unknown], BOB_FORD
From: "Case's Chevy Parts", INTERNET:cases.chevy.parts@prodigy.net
Good Morning Bob and I'd like to wish all our friends and customers a Merry
Christmas and a Happy New Year!
We have car and station wagon fuel tanks on sale for $150.00. Also the
stainless steel car & wagon fuel tank straps for $20.00. Our used parts
warehouse is over flowing ! Call 1-800-466-0041 for a free discount
catalog.
Merry Christmas to all,
Steve Case
Case's Chevy Parts
504 South Water Street
Chesterfield, IN. 46017
765-378-0041
---------------------------------------------------------------------------
---
To: [unknown], BOB_FORD
From: "Joseph Rock", INTERNET:UnderRail@msn.com
Hi Bob
I thoroughly enjoy the forum you provide and want to wish all the best
this holiday season. I am hoping someone has experience or experimented
with brighter light bulbs for the taillights, turn signals, backup lights,
etc. The bulbs on the latest model cars are so much brighter, possibly
halogens, but I don't want to melt my 56 wagon lenses or burn the car to
the
ground ! Brighter replacement bulb part #'s that work would be of great
interest. Thanks in advance.
Joseph Rock, underrail@msn.com
---------------------------------------------------------------------------
--
To: [unknown], BOB_FORD
From: INTERNET:@steward-net.com, INTERNET:@steward-net.com
Bob,
I want to wish you and yours a very Merry
Christmas and
a Happy New Year. Also to everyone that has such great interest in these
old 55-56-and 57 Chevys, I wish Happiness and Good Health to all.
Happy Holidays
Stan Turley
turley@steward-net.com
-----------------------------------------------------
To: [unknown], BOB_FORD
From: "kenneth weinstein", INTERNET:kmw57@hotmail.com
HELP WANTED:
i am getting my 57 nomad repainted. the left rear quarter insert has a
small dent in it.
does anybody know how to straighten it?
or does anyone have one for sale?
can i use a quarter insert from a 2 door hardtop?
FOR SALE
seatcovers 1935-80-mostcars-aftermarket patterns-mostly plaid-came from
closed up
upholstery stores-$85 per car
wheelcovers 1955-64 4/80 supersport 1962-64 4/120
57 and 58 radios(need repair?) manual 25, pushbutton 75
57 powerpack shortblock $500
ken weinstein
44 valleybrook ln.
east amherst, new york 14051
nites 716-689-6888
----------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Lovemy56@aol.com, INTERNET:Lovemy56@aol.com
Rod, My strong suggestion is to have your top professionally installed
!!!!!!! Richard
-------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Lovemy56@aol.com, INTERNET:Lovemy56@aol.com
<<
I have a couple concerns. First of all, I'm going over the entire brake
system on my 56 Chevy. I have all of the wheel cylinders off and I have
them
disassembled for rebuilding. Question is- What (if anything) do I use as
an
assembly lube? Brake fluid won't go into the system until spring. Or do
i
just assemble the wheel cylinders dry? >>
Wyatt, DO NOT assemble your wheel cylinders DRY!!!!!!!! Use Clean brake
fluid! put some on the rubber cups, (be sure & get the edges) & the inside
of
each wheel cylinder. Be sure you completely assemble them, including the
rubber dust covers! Richard
-------------------------------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Chevy156@aol.com, INTERNET:Chevy156@aol.com
Hi Bob,
Seasons Greetings, I'd Like to wish everyone on the list
A Happy Holiday, A Very Merry Christmas & A Happy New Years.
I believe it's been almost 3 years now I've been a member here on Bob's
List
& I still look forward to receiving it every week. Thanks Bob For creating
this list & putting all the hard work you do into it & keeping it going
strong :o) .
Since I've joined the Staff at ChevyTalk.com it doesn't leave me much time
to reply too often to the list here. Sorry About that Bob. However I still
read & keep up with the current events of the list. Sometimes I reply to
members of the list directly when they are in need of help with a problem
that I may have an answer to.
As another year comes to an end I hope everyone had a safe & prosperous
year.
May this coming year bring everyone health, happiness & a Whole Lot of
Cruising in that Classic Chevy Of Yours !!!!
James ..... Chevy156@aol.com
www.ChevyTalk.com ....... Moderator
---------------------------------------------------------------------------
--------------------
To: [unknown], BOB_FORD
From: "Henry McDougall", INTERNET:fast55_@hotmail.com
does anyone on the list have any info on the durability of the 3 speed
manuals that came on these cars. Are they very strong or would my 400hp
327
tear one apart? I am mainly just tired or having to have "tractor" gears
to
have a decent takeoff in first with my close ratio muncie. It gets
expensive
with 4:11's on the highway all the time and to get good economy with some
3.08's its like taking off in 2nd. literally the gear reduction is the
same
as was the stock second gear ratio with the three speed. Ouch!
thanks
Henry McDougall
fast55_@hotmail.com
__________________________________________________ _____
To: [unknown], BOB_FORD
From: INTERNET:GremlinGTs@aol.com, INTERNET:GremlinGTs@aol.com
I have been thinking for some time about taking a 4-dr sedan ( or
hardtop ) and cutting the roof out just inside the rain gutter area, and
making a snaptop like a Jeep has to keep out ( most ) of the rain. I have 3
sedans currently available, one which is a prime candidate for this
project,
and also a friend has a 4-dr hardtop shell with no roof or windshield
frame(
he had to have it cut off to fix another one of his 4-dr hardtops in better
shape), so that could be used to make a fair-weather no-top car as well.
So,
I was wondering, as a convertible needs that extra X for stiffness, whether
anyone has repro'ed one, or there are any specs available for making one,
and
whether the convertible windshield frame has been reproduced or not. That
isn't critical, but the X-member definitely is! As I'm now the owner of my
own home as of Nov. '99, I can think about doing some of these off-the-wall
projects I've dreamed up over the years but never had the place or chance
to
do it. I know I'll never make the kind of money to ever afford even a nice
driver '57 ragtop, so I'm gonna have to settle for a more customized
version
if I ever want an open-air Chevy of my favorite vintage. Anyone done this
to
a 4-dr sedan or Hardtop, please email me off-list. I'm also into AMC cars
such as Gremlins , Javelins, and Pacers, so if you run across any good
parts
or cars, let me know! Thanks, and y'all have a great Holiday season.
Jerry Casper
Woodbridge, VA
'57 4-dr sedan ( x3 )
'55 Suburban
'78 Gremlin GT
'70 Javelin
'79 Pacer wagon
''76 Matador coupe
---------------------------------------------------------------------------
--------------
To: [unknown], BOB_FORD
From: INTERNET:D56CHEVY@aol.com, INTERNET:D56CHEVY@aol.com
Hi again
Just wondering on a quick list poll-How many of you list members own a
55-57
that is a custom or modified?
Just wondering....
Lenny Schaeffer
Malden MA
Bearing Burners Car Club President
781-397-1322
http:/clubs.hemmings.com/bearingburners
-------------------------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:D56CHEVY@aol.com, INTERNET:D56CHEVY@aol.com
Hi All
Happy holidays and Safe New Year!
Our club is interested in attending some long distance shows this upcoming
2001 season. Anyone who knows of some good weekend events on the East
Coast,
please let me know about it (or better, send a flyer or link to me) as we
have traveled up to 500 miles for a show one way-We have heard about a few
shows in Pennsylvania and upstate New York....
Many thanks
Lenny Schaeffer
19 Greenwood St.
Malden MA 02148
Bearing Burners Car Club President
http:/clubs.hemmings.com/bearingburners
-------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:GlnnDrvr@cs.com, INTERNET:GlnnDrvr@cs.com
Hi All and Seasons Greetings. Thanks Bob for this list. Enjoyed your open
house in Oct. Would like feed back from folks who've done the 700 swap
from
a 350. I know I'll move the cross member back and shorten the drive shaft.
Will
my current th-350 column shift rod work? Will the 700 detent cable attach
to
the existing 350 bracket and E-brock carb? Do I NEED to hook up the lock-up
torque converter right now? Can I drive without it for now without harming
the trans? Will my 350 CCI center mounts work with the 700? Any and all
feedback sincerely appreciated. Usually I ask these questions AFTER I've
gotten screwed up. Thought I'd try it beforehand for a change. Will be
buying
and installing the 700 next week in place of the built 350. Thanks in
advance
for all replies.
--------------------------------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Lovemy56@aol.com, INTERNET:Lovemy56@aol.com
<< To: BOB FORD, BOB_FORD
From: "John Canter", INTERNET:kamawp231@vinet.net
BOB John, I'll try & fill in as many blanks as I
can----------Richard
This is for the people that like 50's trivia. The Rock and Roll Hall of
fame was called into a special meeting by Pat Boone. Change the
****???? to the correct word.
Pat Boone. Debbie is missing and "Since I lost my baby, I almost lost my
****"MIND. Elvis: don't worry Pat. Since my baby left me, I have found
at new place to dwell. It
is down at the end of a lonely street called "****HEARTBREAK Hotel".
Tersa Brewer: Don't worry guys. When you want to get
cheered up just "Put another nickel in the ****"NICKELODEON. Beach Boys:
Pat, when you last saw here was she driving a "Little Duce ****?"COUPE
Kingston Trio: Pat to find her "It takes a worried ****.MAN Marty
Robbins: Please find her as I have a date to take her to the hop in my
"White Sport Coat and Pink ****"CARNATION. Danny and the ****JUNIORS. We
will be "At the Hop" also. We want to hear the first rock and
roll song "Rock around the ****"CLOCK by Bill ****HALEY and the Comets.
Big Bopper: when you last saw Debbie she wearing "****CHANTILLY lace"?
Everly Brothers: The last time you saw her, you should have
said "Bye Bye ****"LOVE Wilbert Harrison: I think I saw her in
"****"KANSAS
City. Johnny Cash: I hope see did not fall into a "Ring of ****"FIRE..
Don Gibson: Pat I guess you are
"Lonesome number ****"ONE. Jim Reeves: Pat when she calls tell her to
"Put your sweet
****LIPS a little closer to the ****PHONE:
Buck Owens: Pat I would help you look for her but "I've got a ****TIGER by
the tail". Johnny Horton: "When its Springtime in ****"ALASKA, I will
look for here up there.
Editor's note. Richard, you are 100 percent correct. You really know your
music.
BOB
---------------------------------------------------------------------------
---------
end of 57-56-55 CHEVY LIST
BOB FORD
18091 MARK CIRCLE
VILLA PARK, CALIFORNIA 92861-2648
BOB_FORD@COMPUSERVE.COM
http://ourworld.compuserve.com/homepages/BOB_FORD/
http://members.home.net:80/rick.b/Bobford.htm
VOICE 714-637-8877
FAX 714-637-2955
Editor of the 57-56-55 CHEVY LIST and TURBOGLIDE REGISTRY
Sent: Saturday, December 30, 2000 7:51 AM
To: Blind.Copy.Receiver@compuserve.com
Subject: 57-56-55 CHEVY LISTL
THIS IS THE 57-56-55 CHEVY LIST
THIS LIST IS DESIGNED AS A MEANS FOR PEOPLE INTERESTED IN THE 1955, 1956,
AND 1957 CHEVROLETS TO COMMUNICATE WITH EACH OTHER. ALL OPINIONS
ARE WELCOME.
TO POST SOMETHING ON THIS LIST PLEASE E-MAIL YOUR POST TO
BOB_FORD@COMPUSERVE.COM
THERE IS NO COST TO BECOME A LIST MEMBER AND ONLY LIST MEMBERS ARE
ALLOWED TO POST SOMETHING ON THE LIST.
THIS 57-56-55 CHEVY LIST IS NOT SENT OUT ON ANY SET SCHEDULE SO IF YOU
WANT TO POST SOMETHING THAT CONTAINS A DATE, PLEASE SEND IT IN EARLY
SO I CAN GET IT OUT TO THE LIST MEMBERS BEFORE THE DATE OF THE EVENT.
PLEASE INCLUDE YOUR CITY AND STATE WITH YOUR POSTS. IF YOU ARE
POSTING SOMETHING FOR SALE PLEASE ALSO INCLUDE
1. YOUR PHONE NUMBER
2 THE PRICE
3. WHEN YOU WILL BE AT YOUR PHONE NUMBER AND YOUR TIME ZONE.
TAKE AS MUCH SPACE AS YOU WANT AND FULLY DESCRIBE WHAT YOU HAVE
FOR SALE OR WANT TO BUY.
YOUR COMMENTS ABOUT THIS LIST ARE WELCOME.
IF YOU WANT TO SEND ME E-MAIL THAT YOU DO NOT WANT ON THE LIST
PLEASE PUT "PRIVATE NOT FOR THE LIST' AS THE SUBJECT.
THE OPINIONS EXPRESSED IN THIS LIST ARE THE MEMBERS OPINIONS AND NOT
NECESSARILY MINE.
THANKS
BOB FORD
EDITOR
__________________________________________________ ____________________
To: [unknown], BOB_FORD
From: INTERNET:OvalRace25@aol.com, INTERNET:OvalRace25@aol.com
Napa, CA
55 Chevy WANTED. Must be a RED Sedan, Big Block, manual trans, stock
styling
and trim, original style interior AND Must BE completely show quality
"frame
off" in every nook and cranny. Must be street legal and tame enough to
drive
cross country on power tour but set ya back in the seat when you stab it a
little. I am looking for the best car out there!
R Dahlgren
rdahlgren@aol.com
---------------------------------------------------------------------------
---------------
To: [unknown], BOB_FORD
From: "Jeff Wilson", INTERNET:jwilson@unctv.org
Bob- please post to the list if one goes out before New Years.
Just a thought for those of you who (like me) think the
REAL millennium begins THIS new years eve....
Consider going out just before midnite and driving your
Classic Chevy "into the new millennium"....
CJ Wilson
------------------------------------------------
To: BOB FORD, BOB_FORD
From: John Bresnik, INTERNET:bresnik@home.com
Dear Bob,
These prices are unrealistic -- very few people will pay $40,000 and up for
these Chevys unless they're rich. What happened to the $10-15,000 range?
John Bresnik
Escondido, CA
Editor's note. There has been some very expensive cars listed. If you
have a car for sale please send it in. My guess is that cheaper cars sell
faster than expensive ones. List members, what are your feelings about
seeing expensive cars for sale?
BOB
---------------------------------------------------------------------------
---------------------
To: [unknown], BOB_FORD
From: "Mike Nolan", INTERNET:mpnolan@gte.net
Bob,
I heard that you can put GM S10 or S15 small truck disc brakes an my 57
Chevy using the original front spindles.
My questions to the group are:
What year?
What wheel bearings?
What dust covers are used?
What brackets hold the calipers?
I have a 57 210 Townsman Wagon.
Thanks,
Mike Nolan
St. Peters Mo.
---------------------------------------------
To: "Bob Ford", BOB_FORD
From: "Edward Shockley", INTERNET:drshock@insectria.net
Bob,
I received a letter from the historical folks at A.O. Smith yesterday. It
was confirmed that A.O. Smith made all the two piece frames for Chevrolet.
The one piece designs were made by Chevrolet themselves at some plants.
The A.O. Smith frames were shipped from one of two plants directly to the
Chevrolet plants for final assembly (specific bracket welding). This was
the setup as far back as 1954 and thru 1958. A.O. Smith made all the
frames
for the Corvette during these years.
I did receive some other information from a separate source that says, at
least after 1958, that Budd also made one piece frames for Chevrolet along
Chevrolet making some of their own one piece design and with A.O. Smith
still making the two piece frames. So three frame suppliers in the
1958-1964 years it would seem. This information is from Chevrolet in
1964.
Pretty interesting.
Edward D. Shockley
-------------------------------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Leonardjohn@firestoneindustrial.com,
FOR READING ENTERTAINMENT ONLY...............
"There are 987 Chevy bowties on a 55 Bel Air's dash trim plates." Gee my
eyes are strained. Just kidding. I read it in a publication I have had
for a long time. Just a bit of trivia not many people know. Thought you'd
get a laugh that someone did actually count them. No, I didn't verify this
info.
-----------------------------------------------------------
To: [unknown], BOB_FORD
From: Lynn Mark Sims, INTERNET:lsims88usa@pipeline.com
Happy Holidays!...for Richard and all readers,
I consulted my "vast library"
of 50's videotaped movies and, yes indeed, there
IS a movie with the official opening credit
title "Rock Around the Clock" featuring Bill
Haley and the Comets...the movie is in black
and white and is part of the fabulous Alan Freed
series of rock'n'roll performances thinly
concealed as teenage movies which were released
in the Fifties...the only notable group
included in this one appears to be The
Platters but does have one of my fave '50's actresses,
Lisa Gaye!...watch for Rock retrospective marathons
which is where I taped the Alan Freed series
which I recommend to all fans of the birth of
Rock & Roll!....'57 Chevys Forever! and a groovy
2001 to all...Lynn and Milly Sims
------------------------------------------------------
To: [unknown], [74353,2064]
From: INTERNET:esurfer@mindspring.com, INTERNET:esurfer@mindspring.com
I have a '69 Camaro CHERRY to trade if interested..Hot rod.
esurfer@mindspring.com
-----------------------------------------
To: [unknown], BOB_FORD
From: "Case's Chevy Parts", INTERNET:cases.chevy.parts@prodigy.net
Good Morning Bob and I'd like to wish all our friends and customers a Merry
Christmas and a Happy New Year!
We have car and station wagon fuel tanks on sale for $150.00. Also the
stainless steel car & wagon fuel tank straps for $20.00. Our used parts
warehouse is over flowing ! Call 1-800-466-0041 for a free discount
catalog.
Merry Christmas to all,
Steve Case
Case's Chevy Parts
504 South Water Street
Chesterfield, IN. 46017
765-378-0041
---------------------------------------------------------------------------
---
To: [unknown], BOB_FORD
From: "Joseph Rock", INTERNET:UnderRail@msn.com
Hi Bob
I thoroughly enjoy the forum you provide and want to wish all the best
this holiday season. I am hoping someone has experience or experimented
with brighter light bulbs for the taillights, turn signals, backup lights,
etc. The bulbs on the latest model cars are so much brighter, possibly
halogens, but I don't want to melt my 56 wagon lenses or burn the car to
the
ground ! Brighter replacement bulb part #'s that work would be of great
interest. Thanks in advance.
Joseph Rock, underrail@msn.com
---------------------------------------------------------------------------
--
To: [unknown], BOB_FORD
From: INTERNET:@steward-net.com, INTERNET:@steward-net.com
Bob,
I want to wish you and yours a very Merry
Christmas and
a Happy New Year. Also to everyone that has such great interest in these
old 55-56-and 57 Chevys, I wish Happiness and Good Health to all.
Happy Holidays
Stan Turley
turley@steward-net.com
-----------------------------------------------------
To: [unknown], BOB_FORD
From: "kenneth weinstein", INTERNET:kmw57@hotmail.com
HELP WANTED:
i am getting my 57 nomad repainted. the left rear quarter insert has a
small dent in it.
does anybody know how to straighten it?
or does anyone have one for sale?
can i use a quarter insert from a 2 door hardtop?
FOR SALE
seatcovers 1935-80-mostcars-aftermarket patterns-mostly plaid-came from
closed up
upholstery stores-$85 per car
wheelcovers 1955-64 4/80 supersport 1962-64 4/120
57 and 58 radios(need repair?) manual 25, pushbutton 75
57 powerpack shortblock $500
ken weinstein
44 valleybrook ln.
east amherst, new york 14051
nites 716-689-6888
----------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Lovemy56@aol.com, INTERNET:Lovemy56@aol.com
Rod, My strong suggestion is to have your top professionally installed
!!!!!!! Richard
-------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Lovemy56@aol.com, INTERNET:Lovemy56@aol.com
<<
I have a couple concerns. First of all, I'm going over the entire brake
system on my 56 Chevy. I have all of the wheel cylinders off and I have
them
disassembled for rebuilding. Question is- What (if anything) do I use as
an
assembly lube? Brake fluid won't go into the system until spring. Or do
i
just assemble the wheel cylinders dry? >>
Wyatt, DO NOT assemble your wheel cylinders DRY!!!!!!!! Use Clean brake
fluid! put some on the rubber cups, (be sure & get the edges) & the inside
of
each wheel cylinder. Be sure you completely assemble them, including the
rubber dust covers! Richard
-------------------------------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Chevy156@aol.com, INTERNET:Chevy156@aol.com
Hi Bob,
Seasons Greetings, I'd Like to wish everyone on the list
A Happy Holiday, A Very Merry Christmas & A Happy New Years.
I believe it's been almost 3 years now I've been a member here on Bob's
List
& I still look forward to receiving it every week. Thanks Bob For creating
this list & putting all the hard work you do into it & keeping it going
strong :o) .
Since I've joined the Staff at ChevyTalk.com it doesn't leave me much time
to reply too often to the list here. Sorry About that Bob. However I still
read & keep up with the current events of the list. Sometimes I reply to
members of the list directly when they are in need of help with a problem
that I may have an answer to.
As another year comes to an end I hope everyone had a safe & prosperous
year.
May this coming year bring everyone health, happiness & a Whole Lot of
Cruising in that Classic Chevy Of Yours !!!!
James ..... Chevy156@aol.com
www.ChevyTalk.com ....... Moderator
---------------------------------------------------------------------------
--------------------
To: [unknown], BOB_FORD
From: "Henry McDougall", INTERNET:fast55_@hotmail.com
does anyone on the list have any info on the durability of the 3 speed
manuals that came on these cars. Are they very strong or would my 400hp
327
tear one apart? I am mainly just tired or having to have "tractor" gears
to
have a decent takeoff in first with my close ratio muncie. It gets
expensive
with 4:11's on the highway all the time and to get good economy with some
3.08's its like taking off in 2nd. literally the gear reduction is the
same
as was the stock second gear ratio with the three speed. Ouch!
thanks
Henry McDougall
fast55_@hotmail.com
__________________________________________________ _____
To: [unknown], BOB_FORD
From: INTERNET:GremlinGTs@aol.com, INTERNET:GremlinGTs@aol.com
I have been thinking for some time about taking a 4-dr sedan ( or
hardtop ) and cutting the roof out just inside the rain gutter area, and
making a snaptop like a Jeep has to keep out ( most ) of the rain. I have 3
sedans currently available, one which is a prime candidate for this
project,
and also a friend has a 4-dr hardtop shell with no roof or windshield
frame(
he had to have it cut off to fix another one of his 4-dr hardtops in better
shape), so that could be used to make a fair-weather no-top car as well.
So,
I was wondering, as a convertible needs that extra X for stiffness, whether
anyone has repro'ed one, or there are any specs available for making one,
and
whether the convertible windshield frame has been reproduced or not. That
isn't critical, but the X-member definitely is! As I'm now the owner of my
own home as of Nov. '99, I can think about doing some of these off-the-wall
projects I've dreamed up over the years but never had the place or chance
to
do it. I know I'll never make the kind of money to ever afford even a nice
driver '57 ragtop, so I'm gonna have to settle for a more customized
version
if I ever want an open-air Chevy of my favorite vintage. Anyone done this
to
a 4-dr sedan or Hardtop, please email me off-list. I'm also into AMC cars
such as Gremlins , Javelins, and Pacers, so if you run across any good
parts
or cars, let me know! Thanks, and y'all have a great Holiday season.
Jerry Casper
Woodbridge, VA
'57 4-dr sedan ( x3 )
'55 Suburban
'78 Gremlin GT
'70 Javelin
'79 Pacer wagon
''76 Matador coupe
---------------------------------------------------------------------------
--------------
To: [unknown], BOB_FORD
From: INTERNET:D56CHEVY@aol.com, INTERNET:D56CHEVY@aol.com
Hi again
Just wondering on a quick list poll-How many of you list members own a
55-57
that is a custom or modified?
Just wondering....
Lenny Schaeffer
Malden MA
Bearing Burners Car Club President
781-397-1322
http:/clubs.hemmings.com/bearingburners
-------------------------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:D56CHEVY@aol.com, INTERNET:D56CHEVY@aol.com
Hi All
Happy holidays and Safe New Year!
Our club is interested in attending some long distance shows this upcoming
2001 season. Anyone who knows of some good weekend events on the East
Coast,
please let me know about it (or better, send a flyer or link to me) as we
have traveled up to 500 miles for a show one way-We have heard about a few
shows in Pennsylvania and upstate New York....
Many thanks
Lenny Schaeffer
19 Greenwood St.
Malden MA 02148
Bearing Burners Car Club President
http:/clubs.hemmings.com/bearingburners
-------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:GlnnDrvr@cs.com, INTERNET:GlnnDrvr@cs.com
Hi All and Seasons Greetings. Thanks Bob for this list. Enjoyed your open
house in Oct. Would like feed back from folks who've done the 700 swap
from
a 350. I know I'll move the cross member back and shorten the drive shaft.
Will
my current th-350 column shift rod work? Will the 700 detent cable attach
to
the existing 350 bracket and E-brock carb? Do I NEED to hook up the lock-up
torque converter right now? Can I drive without it for now without harming
the trans? Will my 350 CCI center mounts work with the 700? Any and all
feedback sincerely appreciated. Usually I ask these questions AFTER I've
gotten screwed up. Thought I'd try it beforehand for a change. Will be
buying
and installing the 700 next week in place of the built 350. Thanks in
advance
for all replies.
--------------------------------------------------------------------------
To: [unknown], BOB_FORD
From: INTERNET:Lovemy56@aol.com, INTERNET:Lovemy56@aol.com
<< To: BOB FORD, BOB_FORD
From: "John Canter", INTERNET:kamawp231@vinet.net
BOB John, I'll try & fill in as many blanks as I
can----------Richard
This is for the people that like 50's trivia. The Rock and Roll Hall of
fame was called into a special meeting by Pat Boone. Change the
****???? to the correct word.
Pat Boone. Debbie is missing and "Since I lost my baby, I almost lost my
****"MIND. Elvis: don't worry Pat. Since my baby left me, I have found
at new place to dwell. It
is down at the end of a lonely street called "****HEARTBREAK Hotel".
Tersa Brewer: Don't worry guys. When you want to get
cheered up just "Put another nickel in the ****"NICKELODEON. Beach Boys:
Pat, when you last saw here was she driving a "Little Duce ****?"COUPE
Kingston Trio: Pat to find her "It takes a worried ****.MAN Marty
Robbins: Please find her as I have a date to take her to the hop in my
"White Sport Coat and Pink ****"CARNATION. Danny and the ****JUNIORS. We
will be "At the Hop" also. We want to hear the first rock and
roll song "Rock around the ****"CLOCK by Bill ****HALEY and the Comets.
Big Bopper: when you last saw Debbie she wearing "****CHANTILLY lace"?
Everly Brothers: The last time you saw her, you should have
said "Bye Bye ****"LOVE Wilbert Harrison: I think I saw her in
"****"KANSAS
City. Johnny Cash: I hope see did not fall into a "Ring of ****"FIRE..
Don Gibson: Pat I guess you are
"Lonesome number ****"ONE. Jim Reeves: Pat when she calls tell her to
"Put your sweet
****LIPS a little closer to the ****PHONE:
Buck Owens: Pat I would help you look for her but "I've got a ****TIGER by
the tail". Johnny Horton: "When its Springtime in ****"ALASKA, I will
look for here up there.
Editor's note. Richard, you are 100 percent correct. You really know your
music.
BOB
---------------------------------------------------------------------------
---------
end of 57-56-55 CHEVY LIST
BOB FORD
18091 MARK CIRCLE
VILLA PARK, CALIFORNIA 92861-2648
BOB_FORD@COMPUSERVE.COM
http://ourworld.compuserve.com/homepages/BOB_FORD/
http://members.home.net:80/rick.b/Bobford.htm
VOICE 714-637-8877
FAX 714-637-2955
Editor of the 57-56-55 CHEVY LIST and TURBOGLIDE REGISTRY