PDA

View Full Version : Part identification???



BamaNomad
07-03-2020, 09:18 AM
In sorting thru boxes of Nomad parts to pull out parts which I need to paint, I also came across a stainless item which I don't recognize as a Nomad part.. Is this a hardtop part? or ??

Tabasco
07-04-2020, 06:58 AM
You are right, not for a Nomad. That is either a hardtop or convertible piece.

markm
07-04-2020, 10:45 AM
I do not recall that part on my 56 HT or 55 dr 150.

TrifiveRichard
07-04-2020, 01:11 PM
Could the part be at the bottom of the windwing?

BamaNomad
07-04-2020, 02:42 PM
That was a possibility that occurred to me Richard... but I don't own a hardtop any more.. (had a couple in the past).. :)

PS. I spent 5 hrs at my 'old shop' this morning spraying some 2K primer surfacers on all the small parts I HOPE to paint RED in the next few days.. Is your booth still available for tomorrow afternoon and Monday? I'll probably have to sand all these parts (35 of them) tomorrow afternoon, but hopefully could paint them on Monday.. (My first try at 'base / clear'.... ) .. crossing my fingers!~!~

TrifiveRichard
07-05-2020, 05:38 AM
You could hang the parts later today and spray tomorrow. I’ll be at the other shop most of today.