Nick_nl
01-01-2021, 11:44 AM
Hi guys,
Best wishes for the new year.
I have a question about my starter motor.
It al of a sudden makes really awful grinding noises.
So i took the starter off and found this.
https://www.sleijpen.net/foto/Bel_Air/SBC 355/Startmotor/20210101_153154.geschaald.jpg
https://www.sleijpen.net/foto/Bel_Air/SBC 355/Startmotor/20210101_153209.geschaald.jpg
https://www.sleijpen.net/foto/Bel_Air/SBC 355/Startmotor/20210101_153214.geschaald.jpg
It looks like the starter has been walking, both bolts were bent. The bent started just above the threads.
During the installation I did use shims to get the proper alignment.
How do i fix this issue?
Thanks,
Nick
Best wishes for the new year.
I have a question about my starter motor.
It al of a sudden makes really awful grinding noises.
So i took the starter off and found this.
https://www.sleijpen.net/foto/Bel_Air/SBC 355/Startmotor/20210101_153154.geschaald.jpg
https://www.sleijpen.net/foto/Bel_Air/SBC 355/Startmotor/20210101_153209.geschaald.jpg
https://www.sleijpen.net/foto/Bel_Air/SBC 355/Startmotor/20210101_153214.geschaald.jpg
It looks like the starter has been walking, both bolts were bent. The bent started just above the threads.
During the installation I did use shims to get the proper alignment.
How do i fix this issue?
Thanks,
Nick