I am helping a friend out with his car which is a tuned port 350 that has been bored & stroked to 383, the cam is a hyd roller and Vortec heads. The car has sat for 5 years and the fuel system is trashed. Question who makes a good aftermarket injector 22-24 pound. Has Accel in it now. looking at AFIS, Fast & Edelbrock.
-
-
My first thought is that any of them should be fine, especially for this application.
All of those are probably re-branded OEM replacement. -
I'm surprised you don't try to clean them yourself.
Look on eBay if you want new ones. They have new ones pretty cheap.56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali DuramaxComment
-
I used a similar method the cnut's you tube video on my dad's 34, which has a a 92 LT1 in it. Car has sat for several years, needed fuel pump, new fuel lines and cleaned the injectors. I ran a couple of tanks of injector cleaner after and she runs like new.Comment
-
Ordered Accel ones from Jegs will be here Friday. This car is an original 350 IROC with the Aussie built 9 bolt rear and runs 13.00 in 1/4 getting 20 mpg getting there.Comment
Comment