Making some more progress on the 57 Nomad today . The new choke line has the same dia. as the S/S heat riser tube which is flush with the top hole in the re-po ram horn exhaust manifold . So I either I have to try to tap down the S/S tube 3/8 or so further into the exhaust manifold , or possibly drill 3/8 of the top of the S/S heat riser tube away . The only other option is if I can get a 3/16 dia. tube to fit into the S/S heat riser tube, and then fit it into the choke line like a sleeve ? I still have to install the upper and lower radiator hoses , the A/C glass bowl fuel filter , and line from pump to filter , and filter to Carb . I also noticed that I do not have a condenser on top of the generator , do I need one ? I also do not have a condenser near my voltage regulator do I need one their ? The car has power steering but no A/C , also it dose have a modern reproduction wonder bar radio in it . The voltage regulator seems to be mounted on the inside of the radiator support so I will be able to mount that . We are going to break the engine in without the inner fenders . Any help will be appreciated
