57 Chevy 210 Sedan Post Accelerator Linkage

[210Chevy]

Hello; friends I have a 1957 Chevy 210 2door Sedan Post that has a small block 327 in it and a 1406 Elderbrock 4 bl Carburetor. I need all accelerator linkage rods/connectors or a kit from the accelerator pedal to carburetor can anyone help me?

Thanks!
William

[boybowser]

Hello; friends I have a 1957 Chevy 210 2door Sedan Post that has a small block 327 in it and a 1406 Elderbrock 4 bl Carburetor. I need all accelerator linkage rods/connectors or a kit from the accelerator pedal to carburetor can anyone help me?

Thanks!
William

Good Morning William, will go through what I have and get back to you Monday or Tuesday, may have what you need

[chevynut]

I might have some of it, at least the pedal and the lever. I'll check if you can't find anything.

[210Chevy]

Ok! thanks let me know what you have.

[210Chevy]

Chevynut, were you able to find anything?

[chevynut]

Chevynut, were you able to find anything?

I'm still at my place in Montana and will be heading home to Colorado in the morning. I'll try to remember to check when I get back.

[210Chevy]

Linkage for 57 Chevy 210

Hey Bob, have you had time to go thru your parts yet? I still need the 57 Chevy 210 2door Sedan Post Throttle Linkage for a V8 engine. (Please see attached) also need Fresh Air Ducts.



Part of Accelrator Linkage to pedal.jpg

thanks!
William

[210Chevy]

Linkage for 57 Chevy 210

Hey Bob, have you had time to go thru your parts yet? I still need the 57 Chevy 210 Sedan Throttle Linkage for a V8 engine (see attached pictures) also need Fresh Air Ducts.



57 Chevy 210 2door Sedan Post throttle rods.jpg

Part of Accelrator Linkage to pedal.jpg

thanks!
William

[chevynut]

I checked my stash and I don't have the gas pedal lever assembly. I have some nice pedals and an accelerator linkage that I converted to a cable setup using a Pontiac cable. I do have one on my 6 cylinder parts car but I don't know if the lever is the same. I think the inside portion is the same. If you can't find anything I would be willing to remove it.

There's one on ebay that looks pretty crusty and the pedal is worn badly...

https://www.ebay.com/itm/334862468281?hash=item4df75bc4b9:g:QXoAAOSwonZkVnq u

There's one on ebay that it says is for a 6 cylinder, but I dont know what makes it different than a V8.

https://www.ebay.com/itm/203050865070?fits=Year%3A1957%7CMake%3AChevrolet&hash=item2f46c651ae:g:GosAAOSwN5BfEX8K&amdata=enc%3AAQAIAAAA0AtAf%2BLksCpM1LCluindSmjj%2FnJu0tVM2vGoMnWLS7BIySOOWp%2FPrQTKQZn6fEUd0FBIfZqiNXLmx20Tzp2SL7w%2Fkxf9osya17C8mfcf8ZkNvKsxKBz2P3gbrGvo%2FD1hUwJeB0PsanmVVrFdEcQhjDvLa2z83S%2BJNUgK%2BC49k17WuRcWk9zrQOA1QSFTXHKVZpZMLjxe0CYzbB2ZsaNh1Jd55TODFTzsY%2Bi54djxC1NCsXMgbcPu8RynN%2FgaIKE9tcV%2B1n7calQROWHZYAmJvAM%3D%7Ctkp%3ABk9SR-qc08eBYg

[chevynut]

Here's the difference

[chevynut]

210chevy, I decided to take one more look in my attic and guess what I found?

IMG_5523.jpeg

The pedal is a super nice used original one.

IMG_5524.jpeg

I don't have the throttle rod but the rest is in nice shape.

IMG_5526.jpeg

[210Chevy]

Linkage for 57 Chevy 210 Sedan

Sorry! chevynut, I have already sourced all that I need the Rods now only Everything in Red I have now please see picture attached. If you have the rods please let me know must be for a v8 engine.


57 Chevy Throttle Rods.jpg

[chevynut]

Sorry! chevynut, I have already sourced all that I need the Rods now only Everything in Red I have now please see picture attached. If you have the rods please let me know must be for a v8 engine.

I have all that stuff in red, but the drawing you've posted is for a 6-cylinder. I posted pics showing the difference between the V8 and 6-cylinder linkage.

[210Chevy]

chevynut, are you sure the one I listed is for a 6 cyl. heck; how do you tell the difference in them?

[chevynut]

chevynut, are you sure the one I listed is for a 6 cyl. heck; how do you tell the difference in them?

I thought it was pretty simple. Look at the pictures of the engines. One clearly shows a V8 and the other a 6 cylinder. If you look in the assembly manual, the "standard" engine is the 6 cylinder and the V8 is an option in the RPO section.

I'd say all you need is the rod from the pedal arm to the carburetor. This is the V8 throttle linkage.