Hello from Hoover AL

[teverett]

Hello Everyone,
My name is TJ and this is my first trifive. It's a 57 210 with bel air trim. I put together a 383 and have it mounted to a 700r4. I has a 9 inch ford rear. Once I get it wired it will be ready to crank and then, knock on wood, move on its own power for the first time in about a decade or so.
Thanks for looking.
Tj

[567chevys]

Hello TJ ,
Welcome to the site , thanks for the Pictures . Where are you located ?
When you can please post some more stuff on your 57

[teverett]

Hello,
I live in Hoover AL. The car is a four door 210 that someone put bel air trim on. When I got it, it had been sitting about a decade and the front clip was off. The front suspension is a tubular/ coilover kit from Speedway along with a sway bar and disc brakes. The transmission is a 700r4 built for racing with a manual valve body and a 3500 stall converter. The rear is a Ford 9 inch unit from Quick Performance. It has 31 spline axles and a Detroit locker with 4.11 gears and disc brakes. I have Caltrac bars on it with their monoleaf springs. The engine is a 383. Forged pistons and rods with a cast steel crank. Compression is 10.6:1. Heads are comp ported AFR 195s. The cam is a Howards hydraulic roller, duration @50 is 247 intake, 253 exhaust and a .565 lift on the intake and .580 lift on the exhaust. 108 lobe separation angle. I have 1.6 scorpion rockers so the lift will be .602 intake and .618 exhaust.

[Belair-o]

Welcome to the trifivechevys site! You have put a lot of work and improvements into your car - sounds like it will be a mover, and a kick to drive!
Regards, Doug

[WagonCrazy]

Welcome to trifivechevys.com! We like pictures and stories of what you are doing to your car. Keep posting, and use the subforums to ask for all kinds of advice.
Another one back on the road soon.

[teverett]

Thanks. Will do. Got some new bling coming from Classic Industries.
Tj