It has been quite a project, much more work than I figured but I am happy with the results so far
Brian
...
Custer55
Registered Member
Last Activity: Today, 04:15 PM
Joined: 02-15-2015
Location: Custer, WI
-
Thanks Doug,
It has been quite a project, much more work than I figured but I am happy with the results so far
Brian...
-
m Continuing to work on the hub cover for the past few days now.
I tried to make this in one piece but it didn't got well so I gave up on it and just...Leave a comment:
-
I built my own frame for my 55 Chevy. It drives and handles great with the C4 Suspension.
This link should take you to the build thread http...Leave a comment:
-
m Work on the steering wheel project continues.
Here I am getting ready to Epoxy all the spokes into the outer rim and center hub. In this shot you...Leave a comment:
-
Thanks, sometimes I do just figure things out as I go though. Lol...Leave a comment:
-
m Here I have all the spokes from the Corvette removed from the rim. The groove at the bottom is where the sewn seam of the leather wrap fits into.
...Leave a comment:
-
m Been a while since I posted but I have been making progress. A lot of this stuff just takes a lot of time to do.
I made a bracket to mount the column...Leave a comment:
-
m The first step was to weld and 1/8" plate behind where I had moved the holes. If I had known how much I need to move them I probably would have just...Leave a comment:
-
m My next project was to set up the steering column. I found my old swap meet find from years ago and started cleaning it up and partially taking it apart...Leave a comment:
-
Thank you and your welcome
...
Leave a comment:
-
Thanks Sid, as I mentioned part of the problem was on my end so glad I got that figured out so I can keep posting my progress....Leave a comment:
-
I got all my pictures to load now and I know what the issue was. Still kind of a pain compared to what it was but doable.
All up to date for now...Leave a comment:
-
m Next up was some work on the windshield frame before painting that. Originally the frame was chrome plated but that is not in the budget at this time....Leave a comment:
-
m Been working on some small projects lately. First one was to get the hood sides to line up better.
This was as good as I could get the passenger...Leave a comment:
-
Ok , I edited my post from 8-21 and the photos did load ok. I think I figured out what the problem was. My camera on my phone was set at 64mp so the files...Leave a comment:
-
Ok, I am going to give this another try. Will see how it goes.
Ok, the website is not letting me upload any photos at all. Says the image...Leave a comment:
No activity results to display
Leave a comment: