Thank you very much! The fiberglass is about 3-5mm thick when done. Im gonna put Steel reinforcement rods inside the box also. Gonna post video about those to when finished.
Car is going to paint shop in mid january so little bit fast timetable ;)
Printable View
Outstanding progress in 2021 Timo! You get my vote for member of the year on website, based on your overall project progress.
Kudos to you!
Onward to 2022. You'll be driving that tri5 soon.
You for sure get high marks in the quality of post department.
Little More progress today and yesterday.
https://youtu.be/MpbokXJ-20Q
Hi Timo,
Thanks for your posts as you continue your progress! Mid-January will be here quick - looking forward to seeing the painter's work.
Regards, Doug
Thank you very much! Yep i think mid january i have the car back from the painter, im now strugling with the rear brakes. I have the ford 9 rear with e brake and really soft pedal.
I think my piston is too far from the pads and disc and have to adjust those closer.
The manual says that i should remove the e brake lever nut and lever and put the nut back and rotate the nut until the piston comes out enough to make contact to the disc and pads.
Can i just rotate the piston instead of removing the lever and gasket from the e brake?
Im really strugling with my brakes. Front banjo bolts leak even when tightened really Hard.
Timo? Are you using copper washers?