Printable View
hey, did`nt want to steal the thread about mounting the starter, so i started new. anyway, mark, you mentioned that dorman sells these knurled bolts. my alternator bracket, one that bolts on the number 1 header bolts, the 3/8 bolt is not snug in it, and a 7/16 is to big. so, maybe the knurled bolt would make up the little gap. does dorman sell all lengths or just the "kit" for starters? thanx!
All I have ever seen is starter bolts in the Help line. If you have a swp and Accessory holes in heads why not use a 72 Chevy truck bracket/ 72 Corvette. A much better setup.
The bolts are only sold to fit starters - in the specific length needed for starters.Quote:
does dorman sell all lengths or just the "kit" for starters
Could you open the hole up a little bit and go with the 7/16 bolt ?
ok, thanks guys, but no holes in the heads. if i drill it,i gotta drill the alt. also, and the bracket. anyway, went out and measured the bolt. same length as the starter bolt, get one this week.