Printable View
Tried doing a search but not a lot of luck with it. Have the original bench seat with a deep throw 4 speed shifter. Looking for some thoughts and ideas what others have done for this. I did find a cup holder arm rest style console that sits on the bench seat I am considering but have not pulled the trigger on it yet. Can't do a link as not computer savvy enough for that, LOL. www.cupholdersplus.com, either the standard or shortened version, not sure. Welcome any thoughts and ideas from others.
i PM`d ya, for i make some.
had one in my 57 and 56, eBayAttachment 11908 (cheap too)
carl's56, Can't tell for sure but looks like a auto shift on the floor? My 57 has a 4 speed with the bench seat shifter and looks like that cup holder would be an issue for shifting clearance? Maybe even more so when doing some "spirited" shifting, LOL. Thanks for the reply and the pic.
Seen your a 'Nam vet. Myself, class of 69-70, Central Highlands. When were you in-country and where? Welcome Home, Brother !
I have the same sort of 'on top of the bench seat' cupholder/console in my '56 Nomad, with floor mounted auto shifter. It's not a big issue since my seat is all the way back but it would be for a short legged person.
I have one from a place called Classic Consoles.com. They make one version for an automatic column shift, and a shorter one for floor shift cars. Might want to check them out. I have the column shift one in my 56.
bustewivell, looks like the shorter one is very similar to the one offered by the website I mentioned. Will do a bit of measuring and see how the fit would be regarding the 4 speed stick. Thanks for the reply.
Here's something I saw in a '72 Chevrolet C10 truck.
Attachment 11909
My friend bought one while we were at Good Guys Scottsdale from So Cal Speed Shop. He got the shorter one for his 55 with a bench seat and a 4 speed. Let me know if you need measurements from his.
busterwivell, measurements would be great, thanks for the reply and offer. I have measured my bench as it is set for me and from the seat back cushion to the shifter handle in 2nd / 4th gear position it measures 19 1/2'' to the rear most portion of the T-handle knob. Have just about decided the "short version" is the critter I need. The longer, narrow one believe would create an issue for the shift handle clearance. Thanks again for offering the measurements and if possible pics of the console in place would be great.
I'll e-mail him now for measurements and a picture. I'm not good at this computer stuff. Send me a PM or something with an e-mail address and I'll forward it to you.
Thanks for the reply and the checking of the measurements/picture. I contacted the console company yesterday and they are sending me some samples of the possible material colors to match my non-stock interior. Should have them within the week and then will decide which console I would like to order. Pretty well decided it will be the shorter console since I have the floor shift trans. Sending you a PM with email info, thanks.
He sent me the dimensions on his.............11 " wide, 15.5 " long, 7 " high. The picture he sent shows trans in 4th gear with console on the seat. I'll forward when I have an address for you.
PM sent with email address, thanks. Do you know the name of the company or vendor that your friend got his console from? May be the same company I am looking at for a console purchase?
Here is the aftermarket 'console' I added to my '56 Nomad a few years ago; it's the shorter of the two they sold. With the Vintage air taking up the standard glove compartment space, I h ad to have some place to put papers/etc...
My seat is all the way back in my driving position. The seat is mounted in it's stock location. The shifter is a Lokar for a Turbo 350 trans. The shifter is fully forward in the PARK position.
Attachment 11918
Attachment 11919
Looks like fits nicely to the bench seat. Would you mind sharing the measurements, from front to back, height and width across the front. Maybe also the amount of the seat portion showing in front of the console. Looks like maybe has a strap that secures it to the bench? Perhaps runs forward and under then back up to the rear of the console? Appreciate the reply and pics. Should have my material color options early next week and then will decide which will fit in best.
Dual Fours:
Sorry to be so slow, but I've spent the last few days helping my son in law re-roof a little building (16x22. It's not large, only about 4 squares, but after the ladder climbing, trying to walk on a roof when I have trouble on level ground, removing old shingles, replacing 3 sections of decking, etc etc.. when I've gotten back home in the evening, I've been SPENT!.. so anyway, I just recalled you'd asked me for some more information so here it is:
The benchtop console I pictured in a prior post this thread is a BC Mini (Bench Console Mini) made by "Classic Consoles". (website here)
https://www.cupholdersplus.com/?utm_source=google&utm_medium=cpc&utm_campaign={ca mpaign}&utm_content={adgroup}&gclid=Cj0KCQjw4v2EBh CtARIsACan3nzD7NvqXmIyyIJ90pGun4CyrbuRABFQEfxisdl0 RuU5r2Dk7Yx-u9saAnujEALw_wcB
It measures 7" tall, 13" from rear to front, 9" across except for the cup holders at the front where it's 11" across. Yes, it has a strap that allows it to be strapped firmly to the seat bottom. The console 'lid' opens from the drivers side laterally...
I hope this information and the website helps:
Thanks for the pic and dimensions. Looks to be the one for me. Just waiting to receive the sample material colors before I make an order.
Sounds as if you partook of a full day of activities with the roofing. Have done a bit of that myself but not for several years. At 72 years young I don't get on roofs near as much as I did years ago. When we roofed out house we laid down 34 squares, all hand hammered, no staple guns used. Carried 11 bundles up a 16' ladder, one after the other. Don't think I've got that in me again at the moment, LOL.
Check out the website; they show a LOT of colors but probably isn't going to be an exact match! My suggestion would be to choose a 'close color' that is a bit darker than your interior which is what I had to do.
Yep, Roofing Friday and Saturday... did me in at 73 yrs old! My son in law is 40 and spent his late teen and early adult years roofing with his father/uncle, but we both were WAY OUT of roofing shape! *L* When I was 40 or younger, I did a 25 square garage I'd built, and reroofed my home at the time around 32 squares, but I found out that was a LONG TIME AGO! *L* We both thought doing such a small roof would be a 'kick'... *L* .. but instead it kicked our rears!
Just wanted to share I FINALLY received my bench seat console as ordered in mid-May. Arrived just last Friday but am VERY pleased with the look. Bama, it appears I did order the same console as you show altho in a different color, lol. The supplied color is very close to my interior color and looks great. Not the best pic, a little dark as I took it with the 57 sitting in the shop and not outside.
It looks good Dual Fours! :)
That's not a cup holder. He sticks his beer cans in there ;)Quote:
Originally Posted by Troy
Looks very Good , nice choiceQuote:
Originally Posted by Dualfours
Sid
looks good, what hold it in place.
Not shown but when in actual use there is a webbed cinch strap that runs under the bench seat and back around to the console. Similar to a cargo ratchet strap minus the ratchet, uses a toothed slip buckle.Quote:
Originally Posted by markm
Mine has that, too, but I just have mine resting on the seat. It does not slide around.