My luck the next set would not fit the chassis. Hate to say it but I would probably make a correction on collector.
Printable View
My luck the next set would not fit the chassis. Hate to say it but I would probably make a correction on collector.
I agree that you should cut off the original rear engine mounts. Then return those headers for a set that tuck in above the bottom of the frame. Even when my car sat much higher I had headers that went under the rear engine mounts and they would scrape the ground all the time going in and out of driveways and such.
You would most likely need to re-design the trans crossmember for exhaust clearance but you will be much happier in the long run with the exhaust all above the bottom of the frame.
Brian