Printable View
I read the article by Canadian chevy that he posted on installing curved glass and slider excellent post spot on , But i did discover a short cut that he may not have thought of I used a push in clip in the factory holes works perfect. I found them at AU-VE-CO product (part number) AP9829 nylon nuts about $9.00 for 25 all you will need for both sides
Do you have photos of them installed? Have you installed the slider glass already? Photos? :)
So many posts would be so much more informative, and interesting if people would just take a few extra minutes to simply post a picture. Otherwise you can only guess.
ok guys at 70 not to techie but I try to get some pics. out there
Attachment 11736Attachment 11737Attachment 11738[Attachment 11739Attachment 11740
Here are some photos of the clips i used to attach the fuzzies
Thanks for the pictures.
The photos do help. It appears your photos only show the clips installed for the Upper channels.. or did you also use them for the lower channel (for the sliders) as well??
Tip: If you back off just a bit with the photos, and show more 'context' (areas surrounding the clip area) it helps to understand where you are installing the clips...
Good idea. I am just about there on my build. I will get some of them coming.
Toms57
Is there a list out there somewhere that lists the order that the headliner bows are to be. I know that they have a code # on each one.
Toms57
Here you go Tom
Hope this helps you
Sid