Can any body tell me where they are getting this British Honduras Mahogany plywood for the cargo area's for the 55-57 Nomad wagon's ? Is it a "Ciadella thing" ?
Printable View
Can any body tell me where they are getting this British Honduras Mahogany plywood for the cargo area's for the 55-57 Nomad wagon's ? Is it a "Ciadella thing" ?
Where did you get that term, nomad? Is that something being advertised by Ciadella currently? That's a new one to me... Originally GM used a 'marine grade' plywood, and I doubt it was 'british honduras mahogany'...
Bama , go to e-bay item number 254991409867 . Real nice 57 Nomad Serra Gold/Adobe beige. Ad says , New, per factory, cargo linoleum ( Pete Ciadella) and British Honduras Mahogany under Linoleum . This is not the first time I've seen someone mention this British Honduras Mahogany plywood for under the Linoleum . May be it's just people who are handy with wood and want to cut/make their own ? because I have seen this before, was wondering if it was available in a kit for the 55-57 Nomads ?
Nomad, I agree that '57 is pretty nice (2nd owner car).. it says the linoleum came from Ciadella (that's something they do sell), but I haven't seen anyone advertise 'honduras mahogany plywood' and I would have to see something concrete in specification to verify what it is. I know of no source for plywood like that, although I do love working with mahogany boards! :)
pS. I did a google for honduras mahogany plywood and found only a 2-ply, and also a 'mahogany veneer'... The original ply used for wagons was 5-or 6 ply marine grade plywood...
Bama thanks, we are making progress on the Nomad. Got some rear leaf springs from Eaton Detroit. These came to us in black so had to be stripped and painted like a cast grey color . They had two spring rates a 120 and a 138 for the nomad offered , both 5 leafs , they said that the 120 was the standard spring , and the 138 was the heavy duty option for the Nomads . They also said that all the rest of the 1957Chevrolet wagon line came standard with the 138 rate 5 leaf and had a 6 leaf 165 rate spring heavy duty option . I got the 138 with 1' extra lift spring . They also said that nobody makes a grooved leaf spring anymore .
nomad, You should post some progress photos here sometime... I've seen some of your photos and it's beautiful... :)
Bama I would love to post some pictures of my Nomad that my friend is re-storing for me . The problem is I am not computer savvy , and it seems that it's hard to figure it out on this site. I am capable of E-mailing pictures . My friend is amazing at restoring car's and thank you for the compliment's .
Domenic,
I'd be glad to post an photos you want to send to my email. In fact, here are a few you sent to me during the painting of your '57 Nomad, but I'm sure you're well beyond that step now...?
Attachment 11925Attachment 11926Attachment 11927Attachment 11928Attachment 11929
Purty Nomad!
FWIW, about Honduras Mahogany, the discussion at the following link might provide some more info on the topic:
https://www.woodworkerssource.com/bl...ions/mahogany/
I can't imagine where the British part of the name mentioned could come from, since I don't figure mahogany grows there. Maybe it did during the Medieval Warm Period (for those up on ancient climates).
Regards, Doug
Britain 'colonized' British Honduras.. it is now called Belize... (there was also Spanish Honduras... :)
Back to Domenic's '57 Nomad (under restoration in NY)... Here's a shot of the underfloor that he sent me today.. (it's looking great Domenic!)..
Attachment 11931
Attachment 11932
Domenic emailed me a few more photos of the progress on his '57 Nomad a few days ago, so I'll post them here... :)
Attachment 11933
Attachment 11934
Attachment 11935
Attachment 11936
Attachment 11937
Domenic is continuing to move ahead in his '57 Nomad restoration efforts. He sent me a few photos of the car before he began, and also a couple more photos of 'in process' work... The first two photos are of the '57 Nomad (in canyon coral / ivory dress) in 2017 before they began the restoration; the second of which was Domenic and his son at a local cruise in/car show.. The last three photos are of the spare tire well which is being restored out of the car, and which is now ready to be reinstalled in the car. The car is being restored in Tropical turquoise / ivory...
Attachment 11961
Attachment 11962
Attachment 11963
Attachment 11964
Attachment 11965
Domenic's restorer has welded in the prepped/painted spare tire well back into the body....
Attachment 11976
Thanks Gary , in the past the previous owner had removed the tub and it wasn't put back in properly . Here my restorer friend Bob has restored the overlaping edges so this peice is now properly welded in rock soild . Now just some finish work needed .
Thanks Domenic... I was curious as to WHY it was removed during your restoration... and correcting a past problem is a good answer.. :)
Domenic and his restorer have completed re-installation and paint trim out of the restored spare tire carrier, along with the restored rear springs and rear end housing, and a new gas tank. He sent me these photos to post for him.
Attachment 12053
Attachment 12054
Domenic,
Your build thread began with a question about 'sourcing british honduras plywood' for the cargo area. I think we beat the 'british honduras' part of that question pretty well earlier, but now that you're seemingly at the point of actually installing the cargo (and rear seat) plywood, I wanted to provide you the dimensions you will require for cutting the cargo area plywood.
The first image shows a measurement of an 'original' spare tire board with a thickness of 1/2". You will find it difficult to find plywood 'exactly' 1/2"' in thickness. If you do have difficulty, then I would suggest using plywood 'slightly' thicker than 1/2" to eliminate possibilty of cutting your hand with the stainless trim on the spare tire cover. I actually used 5/8" plywood for mine (which is thicker than it needs to be). I think 17/32" would be a better choice.
Attachment 12055
The second image is from an old NNC Nomad Post article by Wayne Oakley showing dimensions to but the boards.
Attachment 12056
I've also attached a pdf (power point) diagram which I made from measuring the boards sold by an 'online seller' which was installed in my '56 Nomad when I purchased it. One pays quite a bit more for these cut boards and shipping rather than buying plywood at your local store and cutting it yourself! The dimension between these two diagrams are slightly different, but the 'tolerance' on the holes in your stainless trim should allow either diagram/dimensions to be used successfully.
PS. you will also have to rout out a small area to fit over the 'small raised area' on the Nomad metal floor (near the rear on the drivers side), and also clearance for your rear tail/brake light wiring to go thru the floor.
Sid,
Can you change the title of this thread to something like "Domenic's 57 Nomad project" ...?
Thanks Sid! :) That'll make it lots easier for Domenic and everyone else to locate for updates.. :)
Message from Domenic today reads.. "we put in the center section or "Ham ", and the backing plates and axels with the new bearing's. Dom"
note: Domenic: I always refer to it as the 'pumpkin' or 'chunk'... never heard it called a ham.. :)
Attachment 12058
Attachment 12059
Attachment 12060
Attachment 12061
Gary , great job with the pictures. Here in Westchester NY. growing up I have heard of the "Center Section " being called a "Pumpkin " but never a" Chunk ". " The Ham "is common here . We also call our long sandwiches "Wedges " here . A common thing to do back in the day was to hook up your reverse lights to a toggle switch and you drove around with your reverse lights on if you wanted to race .
Domenic? Is that you or your restorer friend in the photos? :)
Maybe they are confused with what we in the antique boat restoration refer to as Lloyds of London marine grade plywood, it is mahogany plywood without any voids very nice can come in rotary or slice cut.
sales@harborsales.net 800-345-1712 quite expensive but what the heck if you are in this hobby or boats you are spending money ask me how I know.
OFF TO BOWLING GREEN TOMMAROW.
Tightline5, Thank you very much for the 'name' of the plywood; I'm pretty sure you are right about where the 'honduras mahogany plywood terminology came from. I used the information provided to find a 'source' for this plywood, with the closest thicknesses being:
12 mm (slightly LT 1/2") and 18 mm (18/25.4= 0.708")
Here's the link if anyone wants to order some of this material for their Nomad cargo deck.. :)
https://www.boatbuildercentral.com/p...arine-plywood/
Gary , this is my restorer friend Bob Sekelsky in the picture's installing the rear axel's . I'm in a picture with my son at the Rosehill Shopping Center in Thornwood NY. at their Saturday nite car cruise .This was when the Nomad was painted an incorrect pink color. I included a correct rendering of Chevrolet's 1957 Canyon Corral color it's in the picture before , Owner of that car is unknown and only used for what a correct rendering of what 1957 Canon Corral color should look like . Again thank you for all your help .
I noticed that Bob also has a 1961?? Oldsmobile under his shed, or is that another's car he's restoring....? :)
Gary , that's his 1959 Oldsmobile Super 88 four door hardtop , with vista views . Bob also has a 1958 Chevrolet Impala Sport Coupe , and a 1959 Belair two door sedan , and a 1962 Sunbeam Alpine , and he's still driving his parents 1962 Hillman Wagon that they ordered new and received when then vacationed in England . They ordered it with the steering wheel on the American side , and it came back with them on the ship .
He's got an interesting collection, Dom... :) I'm not a huge fan of '58-59 American cars(Chevy tossed their best design ever and redesigned the '58!).. :).
My next door car buddy has a '64 Sunbeam Tiger which I really like (always wanted one of those).. and when I was in the USAf, a car buddy of mine had a 'damaged' '56 Thunderbird (a tree had fell on it), so he shortened the frame, stuck a VW front suspension on it, and a 430 Mercury engine he had with trans in the chassis, and found a near perfect Hillman wagon body in a local MS junkyard, so he took that and fitted it to the chassis (so he could drive it with or without the Hillman body!).. The same fella also bought new a 1970 Challenger TA, then swapped engine/trans with a airman who had a '66 Plymouth with 426 Hemi and huge 4-speed... (I thought he was crazy, but he ended up with a very unique Challenger).. :) I often wonder what happened to those two cars!
I remember test driving a Sunbeam Tiger in 1966. I decided to take my chances with the Army, I thought the odds were more in my favor.
I figured that was sure death to me as a 19 year old 135 lb punk.
To pull this thread BACK to Domenic's '57 Nomad project... I'll post a few images here that Domenic sent me over the weekend. His restorer had mounted his WS wiper motor and transmissions and has them working (I tried to post his test video but I don't have an internet address for it, only a file on my computer so I cannot post it).
And he's installed the firewall pad, which appears to be a very neat installation (made me want to know where he got the firewall pad, as there are a number of 'crappy' replacement firewall pads available these days. His looks *original*..? maybe NOS? or ?? Domenic can you tell us?
Attachment 12202
I cannot tell how the pad is attached; I can't see the 'factory type' plugs which punch thru from under the dash and should show the head of the plastic push pin under the dash, and the protruding pin on the firewall side. Did the install the push pins from the firewall side (that would be incorrect - backwards from the factory installations!)...
Gary , the firewall pad came from Ol'55 . Sorry for the confusion this firewall pad was just laying in place and not completely installed with the plastic pins yet . Seeing the wiper's going back and fourth was great to see as these were some of the first parts going back onto the car . The door handle's and latches and locking linkage were before the wipers .I would have to say that the rubber body mount cushions were the very first parts. We are going with a "Factory Fit " Wiring harness and I had previously purchased all these parts in " NOS " : fuse box, complete steering wheel hub with the blinker switch, and all related parts . Ignition switch , High Beam switch , False Neutral switch , blue dot ceramic Points resistor, Point sets , re-built original dist. for the 4 barrel with correct weights , rocker panel moldings which I hope are all the same on all Belaire models . the rear end is in with the new axel bearings and seals , retainers and backing plates . The rear leaf's came from " Eaton Detroit " with the spring rate most commonly used on all the 57 wagon's with 1" over arc .
I received the following notation with the image of Domenic's heater installation in his '57 Nomad.
"We have installed the heater , the re-production blower resistor was no good I found a NOS one to use."
Attachment 12280
Looks great , thanks for the update
Sid