Search:

Your picture is too small to read. What is the model number of the Dakota digital "control box"?

Perfection. I saw a C1 corvette that color at Goodguys Colorado and it was really nice looking.

My son and I (Classic Edge Designs) built 113 C4 conversion projects before I shut the part-time business down over a year ago. I have hundreds of pics and maybge some left-over parts for our...

Are these used or new parts?

There are a couple of those on Nomads too, right behind the hump. I didn't use them and my body is nowhere near touching the frame. I used urethane body mounts which seem to be a little thicker. I...

So far I'd say yes, but I do think he INTENDS to come through on his half of the deal. The problem is how many more years will it take?




That's not obvious to me. He told me he's done...

It's actually pretty easy once you get used to it. When you start writing a post or a reply click on the icon with the tree in the picture frame. It will pop up a box where you can select whether...

I was at a guy's shop last night and he has what looks like the exact same cabinets. His place is amazing.....he has a 40x60, 50x75, and what looked like about a 35x50 building all outfitted with...

Nice. Where did you get the cabinets?

Should be pretty easy to find the problem now. Good luck.

I asked Larry to make me a couple of small samples of the charcoal leather with french seams using color matching thread and contrasting thread so I can make a decision which way to go. Here they...

I contacted Larry last week the day after I returned from Montana as he requested. He told me he had the headliner made and that he could come install it Tuesday (yesterday).:) He came over late...

I would apply but they'd probably ask me what my preferred pronouns are and require me to use non-lethal arrows. Then they'd make me record everything to make sure I didn't "abuse" the deer.

The...

LS1 is a far better engine than an LT1 350, unless you're talking about the current 6.2L LT1.

It's a little late but my painter has been painting high-end cars for decades and he uses only one product to prep his cars. He uses a product called "All-U-Need" by Clausen. It's a zinc-enriched...

Not that many people really care about the originality of a tri5 imo unless it's some rare optioned car like a fuel injected one. Even modified Nomads are usually worth more than restored ones, if...

Sorry I misunderstood the issue....I thought you WERE going to replace the ignition switch and were still using the old one. So I'm a little confused....you said the old ignition switch was "shorted"...

Can you check the switch with an ohmmeter? I wouldn't look for anything "backfeeding" it until you can confirm that the IGN terminal isn't connected to the BAT terminal when in the off position. If...

When in the "ACC" or "OFF" position that switch should turn power off to the IGN terminal. SOL should only be hot while cranking. ACC should only be hot when in the ACC position. I don't have any...

As you probably know, the frame will have to be completely sandblasted and cleaned before powdercoating. I used to pay $250-350 to have frames sandblasted after I converted them for the C4...

Yes Paul, I told Larry I wanted the headliner and dash in so I could install the windshield and drive it a little. Hopefully that gets done pretty soon. I also asked him to sew me up some small...

I assume you're talking about steel. For non-structural stuff I use 20 gauge (.036"). If I need a little more stiffness I use 18 gauge (.048"). 16 gauge (.060") is pretty thick and I only use it...

About a week or so Larry and I had a discussion about my interior. He's really struggling to get his shop done, and he's been working on it for over a year. It's a huge project and I really don't...

Wow that vette looks awesome. I'll bet Sue is going to have a blast driving it!!

I did it in this order...... floors, rockers, wheelwells, quarters. I didn't replace my tailpan but I'd do it after the floors. I'd do the trunk floor after the main floor. Repair all mating...