This is what Woody's Hot Rodz says about it....but I think they're wrong. If this were true and you bought an AME frame you'd have to re-title the car. Woodys also sells reproduction frames, so how...
Type: Posts; User: chevynut
This is what Woody's Hot Rodz says about it....but I think they're wrong. If this were true and you bought an AME frame you'd have to re-title the car. Woodys also sells reproduction frames, so how...
I'm not going to say it's legal to put one of these on your car, but apparently it's legal to sell them. There's a legitimate argument to make if someone accidentally damages their VIN tag with a...
I guess my comment was that you can't legally just buy a VIN tag with the numbers on the title and affix it to the car unless you go through a legal process. However, most of these cars are...
It's illegal to sell a VIN tag, if that's what you're looking for.
Here's how I did my cutouts. They're 3 1/2" DMH Performance electric cutouts.
10474
Holy cow! Is that for your business or personal use? If you use a lot I imagine you get a good deal. Do they charge a hazmat fee? I think I'm getting screwed.
Hey Doug, my interior guy lives in Berthoud and if you need an expert to take a look he might be willing to drop by and give you some tips. Let me know if you want his info.
I buy anywhere from 5-10 bottles of argon a year from Airgas. Although that's not a huge account, it's bigger than a lot of them since I'm only operating a part-time small business. The price has...
I'm curious what you guys are paying for pure argon in your area. I have been using Airgas and the price just keeps going up and up. I own two 125CF cylinders and exchange them alternately when...
Step 1. A big part of the VA install is the evaporator, so changing over to a different ending isn't that big of a deal. I don't know if you need a different compressor, but since you don't appear...
Here's the stock front mounts
https://realdealsteel.com/images/F144672247.png
Here's what the stock rear mounts look like
http://www.55-57chevys.com/tech/55/6-8-01.gif
It depends on how you want to mount it, and what they did to install the 400. The stock mounting configuration for the V8 used two mounts on the front of the block, and two on the side of the...
The schematic shows just what I described above. Terminals 85 and 86 are the relay coil. I have no idea why they want you to use such large wires for the relay coil but it's not a problem. A 20...
Great work as usual Robert, but if it was me I'd prefer nothing sticking through the hood in the first place.:eek: I would have looked for a different manifold and air filter solution, or even an...
There's no problem using separate power feeds....they all go back to the battery. Same with grounds.
I'm curious how your circuit works. If the +12 terminal on your fan is connected to a relay,...
Is the "sender" just a switch that closes at a set temperature?
If I understand what you're saying, you want to connect a light to come on anytime the fans are on. If so you are correct in...
Sounds like you have an internal leak either in your MC or your throwout bearing. To isolate it I would remove the line from the MC, cap it, and stand on the clutch pedal to see if it drops over...
Welcome to the site. Nice 55.
Welcome to the site. Nothing wrong with a nice driver. Everyone has their own goals and reasons for owning a tri5 or any other car.
Paul, I think connecting the buzzer to switched power makes more sense and the benefit is that as soon as you turn on the key it tells you the switch is tripped. Probably not a bad way to do it if...
So why don't you wait til the frame is out from under the car to set up the engine/tranny and the rearend? I'm not understanding why you want to do it while the frame is under the car. If you don't...
The stock engine angle is 4 degrees down in the rear relative the the main frame rails. If you don't have a digital level, just level the frame and measure the engine angle. The pinion should...
It's not really a problem. If the inertia switch is tripped, the buzzer is connected to the ECM pump output. When the key is turned on, the pump output goes to 12V for 2 seconds before it shuts...
They only hold up houses and large commercial buildings, so it's possible they can't support a car body that might weigh 800 pounds. :eek:
"As per standards published in 2003 by ASTM, an...