Thanks Bam,Its not too late.I'm glad you posted the pics.I will need them very soon.A pic is worth a 1000 words.
Type: Posts; User: CHKYWUKY
Thanks Bam,Its not too late.I'm glad you posted the pics.I will need them very soon.A pic is worth a 1000 words.
WOW!! What a beauty.
Drove up there with a friend from work.He drives up to get a T shirt for his dad every year.This event has been going on for 37 years. It was a small turn out cause their was another event this same...
HEY Bert,Welcome,This is a great source of Info. for the person who's starting a project.
Welcome and thats a nice 56 you got there. Its great to see a bbc under the hood and a 4 sp muncie to boot.What kind of suspension are you runnin in the rear.
Heres pics of the prop valve allready plumbed to the master.Theres a pluged port on one side and on the other side were the lines go in from the master is the unplugged port [see pics].This power...
Do You guys think 3/16 will work fine with the system I have?,One more thing,The proportion valve has two ports for the front brakes , do you have to use them both or just one port and cap the other...
Thanks Run-Em, I'd like to be using the 3/16 standard steel line,I heard you can bend that without a bender but I think I will buy a cheap bender just in case.Using wire to use as a length gauge is...
I need to run this by you guys before I go out and buy the wrong stuff.I've included some pics of the parts allready installed on my truck and I want to stick with them to save some coin.First , What...
One of my buddys suggested I do my frame with a rhino liner type stuff.What do you guys think? I think that under the cab looks great but the frame also,IDK.I'd like to see some pics of a frame done...
Liv'n The Life You Are.
That is really nice. Forgive me for asking but are these a part of your Residence. If so it must be nice to work at home.
WOW!!! That is a huge shop. How wide is that sectional door? From your pic, It looks gigantic.
Yep, I have some pieces of 4x4 left over from my porch.You can see the big casters laying in the pics of my cab that I'm gonna use.
I had planned on using the cherry picker but after I took the doors off I tried lifting the cab up and decided two guys on each side would be good. I went across the street and got two big kids to...
AH HA. Thanks Rick,that clears things up.The pivot points have to be at the same height. at ride height.I'll have to modify the diff bracket then and if I do that I won't have to bend the bar.You...
Yea I was looking at mounting the bar lower on the frame rail but the top link might hit so I put it on top.Is there a disadvantage of having a J bar verses straight. it wouldn.t be hard to modify...
We got the pan hard bar mocked up.Still need to put a slight bend in it.I cut off the ends of the old small rear cross member and opened up the holes to make the tabs for the frame mount.I'm gonna...
I finally got the 4 link fabed up and mounted.Alot of the rear sus. is still just tacked but I rolled it out of the garage to get a look at the stance and shoot some pics.
Thanks Bam I don't know if I'm going to raise the whole floor or just the center sectionwhere the diff comes up with a piece of bent sheet metal can you post up some pics of how you raised your...
Well didn,t pull the wood off the bed and I,m glad because when we put the box on the diff. hits the bed at full susp. comp.We did get to mark the axle center line by eye ball'n it.It turned out to...
YEP I think i'm gonna put the box on after removing the wood and then roll the axle under and make some stand offs to tack it [axle] in place were my ride height should be,then I'll roll it out in...
The open area faces the back of the truck in front of the rear axle.When I got this project the rear axle was not installed so I need to locate it in the chassis still and figure out the wheel base...
Finished welding up the forward bar mounts,still have a little grinding to do but the hiems fit nicely.I'm still trying to figure out witch way to mount them to the frame and the 2x4 crossmember I'm...
Man I missed it.Looks like it was happening for sure.That panel looks sweet too.