Just joined? Please introduce yourself.
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Modern GTO seat mounting

  1. #1
    Registered Member
    Join Date
    Apr 2013

    Member #:1651
    Posts
    3

    Modern GTO seat mounting

    Has anyone mounted modern style GTO seats in a Tri five ?

  2. #2
    Registered Member
    Join Date
    Apr 2012

    Member #:571
    Posts
    4,672
    I'm sure they have.

    Mounting any late model seat is pretty much the same. The floor in a 55-57 is 1-1/4" higher next to the trans tunnel than it is where the stock seats mount.

    What I did with mine was make an outer mount from 1-1/2" square tube with brackets that let it bolt to the original seat mount bolt holes. On the inside I used a 1/4" x 1-1/2" rectangular bar. That inner mount bar extends back so that the rear mounting bolt goes through the long cross brace under the floor. In front there's a tab bracket that gooes through the floor, and the floor is reinforced.

    Another way to do it is to use a thinner outer mount, and to cut a channel in the floor for the inner mount so that the seat is level side to side. This would let the sit lower. But for my Chrysler seats, they will go lower than a stock seat even with the mounts I used.

  3. #3
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    10,847
    camswingman8x, do you have a pair of them? I used 2000 Eldorado seats in my Nomad, and I've built some custom mounts to sell for installing those seats. I would think the late GTO seats would be kinda small, since it's a small car. I bought a pair of late 90's Lexus SC300/400 seats and I thought they were too small too. The Eldorado seats work great in these cars. Another choice might be the later Monte Carlo seats...they look pretty nice too.

    Here's the 2003Monte seats
    03montecarloss.jpg

    95-99? Lexus seats

    95 lexus sc300.jpg

    the 199X-2002 Eldorado seats.
    2000eldoradoseats.jpg


    And here's the 2000 eldorado seats in my Nomad....

    20120407_0006.jpg
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension


    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1962 327/340HP Corvette
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax
    2019 GMC Sierra Denali Duramax

  4. #4
    Registered Member
    Join Date
    Apr 2013

    Member #:1651
    Posts
    3

    gto seats

    Quote Originally Posted by chevynut View Post
    camswingman8x, do you have a pair of them? I used 2000 Eldorado seats in my Nomad, and I've built some custom mounts to sell for installing those seats. I would think the late GTO seats would be kinda small, since it's a small car. I bought a pair of late 90's Lexus SC300/400 seats and I thought they were too small too. The Eldorado seats work great in these cars. Another choice might be the later Monte Carlo seats...they look pretty nice too.

    Here's the 2003Monte seats
    03montecarloss.jpg

    95-99? Lexus seats

    95 lexus sc300.jpg

    the 199X-2002 Eldorado seats.
    2000eldoradoseats.jpg


    And here's the 2000 eldorado seats in my Nomad....

    20120407_0006.jpg
    yes, I have the gto seats already. I've seen them in tri fives at car shows. I guess that the next time I see that I will ask to take a look at how they were installed.

  5. #5
    Registered Member chevynut's Avatar
    Join Date
    Nov 2011

    Member #:115
    Location
    Fort Collins, CO
    Posts
    10,847
    camswingman, could you post a picture of the bottom of the seats? I want to see the seat tracks. Also, what's the center-to-center distance between the seat tracks?
    56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension


    Other vehicles:

    56 Chevy 2-door BelAir sedan
    56 Chevy 210 4-door sedan
    57 Chevy 210 4-door sedan
    1962 327/340HP Corvette
    1961 Willys CJ3B Jeep
    2001 Porsche Boxster S
    2003 Chevy Silverado 2500 HD Duramax
    2019 GMC Sierra Denali Duramax

  6. #6
    Registered Member
    Join Date
    May 2013

    Member #:1684
    Posts
    1
    I went with GTO seats in our 55. I wanted to use the back seat as well, but it just wouldn't work.










  7. #7
    Registered Member Bihili's Avatar
    Join Date
    Sep 2012

    Member #:896
    Location
    outside K. C.
    Posts
    267
    Welcome FIFTY-FIVE. Nice job on your car.
    Bill 1957-427-177-6-410

  8. #8
    Registered Member Maddog's Avatar
    Join Date
    Aug 2012

    Member #:777
    Posts
    1,324
    BEAUTIFUL...............

  9. #9
    Administrator 567chevys's Avatar
    Join Date
    Oct 2010

    Member #:3
    Location
    Woodland Washington
    Posts
    2,416
    FIFTY-FIVE , Really Nice Car , have any more pictures and also I want to welcome you to the site

    Thanks Sid

    1955 2 DR Post
    1937 Chevy Coupe
    2023 Ford Super Duty F350 TREMOR
    2019 Corvette Z06
    1955 Chevy Nomad
    1935 Ford 2dr Slant back I have 4

  10. #10
    Registered Member
    Join Date
    Apr 2013

    Member #:1636
    Posts
    22
    those gto seats look great in that car. they look sporty to me. can you tell us more on installation? did you bolt them flat on the upper part of the floor. did you cut any off the top or just remove the head rest? how wide are they across the bottom? would appreciate any info. thank you in advance.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •