I have finished the completion of my Nerd Rods DIY chassis and things turned out great however I have a few question that I'm hoping to get some help on and Russell at Nerd Rods has some family issue going on and doesnt have time to help at the moment. I'm wondering if anyone can help with this question I sent Russell.... Do you have a drawing that shows (dimensionally)
the relationship between the body mounts and the centerline of the rear axle and the front spindles? And if you do have those numbers have they been proven to be correct by others that have their bodies installed. I know this question assumes the mounts are located correctly on the chassis but I need to start somewhere. Once I have verified the numbers I will set the body on to make sure things look correct. I have a couple other questions but since this is my first post on this site I'll keep it to a minimum. I'm sure happy to see Chevynut is on this site, this guys work is awesome. Jason