Replaced the hinges on my 57. Now need to get everything adjusted. The space between the hood and cowl is simple enough. the height at the cowl is ok.
My problem is the hood latch on the front. It is off centered to the right.
Can anyone give me a proper proceedurd to follow to get everything where it belongs.
I was thinking of loosing the hinge bolts on the firewall, shutting the hood, adjusting the gaps and tightening the firewall bolts that go in from under the dash. Then opening the hood and tightening the bolts that go in from the engine side.
Let me know if I'm thinking right or if there is a proven proceedure!
Thanks