It sat in pieces from 1987 to 2011. Well started today on taking apart my car! I am installing a Dart SHP, AFR 220 competition heads, Comp Cams hydro roller and valve train, 4340 Eagle rotating assembly, H Beams with dual keys on crank, ATI ect...This motor is built for the DISC Procharger like I have always wanted. Will post some progress pics. I am also painting the fenders, under hood and firewall to match the exterior color. Out with the old and in with the new! Let the fun begin!
Keep us posted, very kool!
looking good, thank for sharing.
ARMY NAM VET, very proud!
56 210 4dr
drive and enjoy them while you work on them, life is to short.
It's always fun to upgrade. Should be a great engine. What is a "DISC Procharger"? Are you supercharging it? And what are "dual keys"? Sorry, I'm a little out of it when it comes to some of this engine stuff.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
Its a centrifugal supercharger. The SC is for self contained. No need to tap the oil pan. Due to the load on the end of the crank, the manufacture suggest installing dual keys.Originally Posted by chevynut
Great winter project.
Bill 1957-427-177-6-410
Thanks JT. I know what a Procharger is but I didn't know what "DISC" meant. Should be a screamer.
56 Nomad, Ramjet 502, Viper 6-speed T56, C4 Corvette front and rear suspension
Other vehicles:
56 Chevy 2-door BelAir sedan
56 Chevy 210 4-door sedan
57 Chevy 210 4-door sedan
1962 327/340HP Corvette
1961 Willys CJ3B Jeep
2001 Porsche Boxster S
2003 Chevy Silverado 2500 HD Duramax
2019 GMC Sierra Denali Duramax
Painted Fire Wall_small.jpgHere is some update pics. Fire Wall Painted, Motor installed, working on changes with stroker motor. Cant wait
SWEET !!!!!!!!!!!!!!!!!!!
Sid
1955 2 DR Post
1937 Chevy Coupe
2023 Ford Super Duty F350 TREMOR
2019 Corvette Z06
1955 Chevy Nomad
1935 Ford 2dr Slant back I have 4
More Progress to this evening. Was able to finish the a/c lines and fire wall plate. Then installed the new fuel lines, brackets for a/c, alternator, crank pulley. For some reason the new Weiand water pump is hitting the pulley. It didn't hit on the old water pump? Did shim out 1/8 inch, but still hitting. Worried nothing will line up and spin the belts if I do more! Also need to look at accelerator setup. Carb sits higher and original rod doesn't work. I dont like the brake lines stuff, will look at doing something to clean up. I have the CPP MCVP1
neeneeed 427 Dart and Brackets.jpgWeiand AL Water Pump.jpgAccelerator and TPS .jpgVintage Air Condensate Drain .jpgNew Booster and Brake Lines.jpg
Posting Permissions
Reply With Quote
