I am working on a 57 4DRHT project that I thin will take about 4 or 5 years to complete. I have ordered a chassis from Laszlo, and to set up the rest of the drive train and body I am going to need the engine and transmission. My concern is that I am planning on buying a reman LS motor. What is the best way to store something like that long term? I have thought about getting an empty block and trans case but they are expensive for something that will not end up being used. I have heard suggestions of setting it up to run once a month or so, or to pull the rockers to relax the valve springs and lube the cylinder walls, but that doesn't get any oil in the bearing surfaces. So what is the consensus on the best long term storage solutions.