Just joined? Please introduce yourself.
Results 1 to 2 of 2

Thread: Identifying your Muncie 4 Speed

  1. #1
    Administrator 567chevys's Avatar
    Join Date
    Oct 2010

    Member #:3
    Location
    Woodland Washington
    Posts
    2,407

    Identifying your Muncie 4 Speed

    Case casting numbers, relating production years and ratios available

    Casting: 3831704 Years: 1963 Only Ratios: M20 2.56 1st , M21 2.20 1st
    Casting: 3851325 Years: 1964 - 1965 Ratios: M20 2.56 1st , M21 2.20 1st
    Casting: 3885010 Years: 1965 - 1967 Ratios: M20 2.52 1st , M21 2.20 1st, M22 2.20 1st
    Casting: 3925660 Years: 1968 - 1970 Ratios: M20 2.52 1st , M21 2.20 1st, M22 2.20 1st
    Casting: 3925661 Years: 1970 - 1974 Ratios: M20 2.52 1st , M21 2.20 1st, M22 2.20 1st

    Ratios of the M20 , M21 , M22

    Year 1963-1965 Type: M20 Rings: None Ratio: 2.56 / 1.91 / 1.48 / 1.00 / 3.16
    Year 1966-1974 Type: M20 Rings: Two Ratio: 2.52 / 1.88 / 1.46 / 1.00 / 3.11
    Year 1963-1974 Type: M21 Rings: One Ratio: 2.20 / 1.64 / 1.28 / 1.00 / 2.27
    Year 1967-1974 Type: M22 Rings: None Ratio: 2.20 / 1.64 / 1.28 / 1.00 / 2.27

    Input Shaft Tooth and Spline Count Related to Year

    Year 1963-1965 Type: M20 Rings: None Spline: 10 Tooth Count: 24
    Year 1966-1970 Type: M20 Rings: Two Spline: 10 Tooth Count: 21
    Year 1970-1974 Type: M20 Rings: Two Spline: 26 Tooth Count: 21
    Year 1963-1970 Type: M21 Rings: One Spline: 10 Tooth Count: 26
    Year 1970-1974 Type: M21 Rings: One Spline: 26 Tooth Count: 26
    Year 1967-1970 Type: M22 Rings: None Spline: 10 Tooth Count: 26
    Year 1969-1974 Type: M22 Rings: None Spline: 26 Tooth Count: 26
    Please note that there are 7 different Muncie input shafts. All 26 spline inputs came with 32 spline output shafts and all 10 spline inputs came with 27 spline output shafts. A common mistake is thinking that all "fine spline" 26 spline input shafts are M22 heavy duty types. This is not true. An M22 gearbox has a 20 degree helix angle on the gearset as opposed to a 30 degree angle. It's roughly a 10 degree difference. From time to time I get people disputing what exact angles are on the gears. Personally, I think the angles vary from gear to gear. 1st gear on an M22 may be 19 degrees, 3rd may be 20 degrees. Also M22 gear sets were of a higher nickel alloy. The straighter angle was designed to produce less end loading of the gear train and less heat but created more noise, thus the nickname "rockcrusher". The higher nickel alloy allowed for more impact of the gears. Another misconception is if you have a drain plug you have an M22. Again this was only true when the first M22 boxes were created. But all 3925661 castings had drain plugs.

    Reading Serial and VIN Numbers

    Serial numbers for Muncie 4 speeds always begin with the letter "P". P stands for Muncie Plant. Not for passenger car as some self proclaimed specialists may think. The letter M was used to ID the Muncie plant for the Muncie 3 speed, so P was the next logical letter. The letter O would add confusion since it resembles zero. The serial number is a date code the transmission was built for a particular year. Serial numbers from 1963 to 1966 included only the month and day. P0101 would indicate January 1st. From 1967 to 1968 the serial number got a year designator and a letter designator for the month such as P8A01, meaning January 1st 1968. One important point is that if you have a Muncie dated with a December build date it was actually built the prior year. An example would be the date code P8T13. This is for a 1968 production car. The T stands for December and 13 is the day. To confirm this simply look at the VIN number. It will usually begin with a 18S101350 or a 28N12950. This means the Muncie was assembled December 13, 1967 for the 1968 model year. The VIN number will usually be a low number. 1969 to 1974 Muncies got a ratio designator at the end of the serial number. An example would be P4D23B. This equates to April 23, 1974, M21 ratio.


    Month Code Chart


    January Letter: A May Letter: E September Letter: P
    February Letter: B June Letter: H October Letter: R
    March Letter: C July Letter: K November Letter: S
    April Letter: D August Letter: M December Letter: T

    Ratio Code Chart


    Letter: A M20 Ratio
    Letter: B M21 Ratio
    Letter: C M22 Ratio
    Important Notes
    Some input shafts produced by the aftermarket and General Motors have no identifying rings on them. The rings originally corresponded with rings or grooves on the counter gear so that the assembler matched a one or two ring input with a one or two ring cluster. When manufacturing was stopped, GM stopped making inputs with these marks, probably to save machining operations. Also 3831704 and 3851325 castings come with a 7/8" counter shaft all others come with a 1 inch counter shaft. There are some odd ball castings out there produced in 1963 to 1966 years. I've left them out since they really are not common.

    1955 2 DR Post
    1937 Chevy Coupe
    2023 Ford Super Duty F350 TREMOR
    2019 Corvette Z06
    1955 Chevy Nomad
    1935 Ford 2dr Slant back I have 4

  2. #2
    Guest

    Re: Identifying your Muncie 4 Speed

    This information is available for download in Adobe PDF by clicking the link below:

    http://www.trifivechevys.com/docs/Muncie.pdf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •