Just joined? Please introduce yourself.
Results 1 to 2 of 2

Thread: Has anybody that has one, use the Gouging tip on a Plasma cutter?

  1. #1
    Banned
    Join Date
    Nov 2015

    Member #:2775
    Posts
    1,426

    Has anybody that has one, use the Gouging tip on a Plasma cutter?

    Long story, but I need to remove the trailer jack I just welded the shit out of on a friends trailer after putting it where he told me. I have a new Hypertherm 145 plasma with the gouging tips that can be used to blow out a weld. I'm just going to use cut-off wheels since I don't want to practice on this project, but it sure would be nice to know how the plasma gouge cutting works to do that?

  2. #2
    Registered Member
    Join Date
    Jun 2016

    Member #:3018
    Posts
    157
    I haven’t tried it on mine but a good friend of mine told me it works really well to remove welds and requires minimal touch up with a cutoff wheel or Roloc disc to completely remove the weld. if you’re concerned about the aesthetics of the finished product I’d build up a similar weld bead on a piece of scrap with the same thickness and figure out what technique works best.

    https://www.hypertherm.com/en-US/lea...s/?region=NART

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •