Just joined? Please introduce yourself.
Page 1 of 22 12311 ... LastLast
Results 1 to 10 of 219

Thread: 39 Ford Project

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered Member Custer55's Avatar
    Join Date
    Feb 2015

    Member #:2442
    Location
    Custer, WI
    Posts
    504

    39 Ford Project

    I have been working on our 39 Ford 2 door sedan that we originally purchased around 1994 to 1995. Bought it with the intention of building a street rod and did buy some parts and got started on the project and got a few things done on it. I got a Heidt's Mustang II front cross member installed and a Chassis Engineering leaf spring kit with a swap meet 57 Ford 9 inch rear end. Also bought a Bitchin Products recessed firewall and front floor board kit but never got to installing them. The project stalled when our son was born in 1996 as time and budget for the project was hard to come by for a while. Last summer we sold another project car (1937 Pontiac) and decided we should probably sell the 39 Ford also. After looking over what shape the car was in and the money we have in it with the original purchase price and the parts we had purchased for it we decided the only way to even come close to breaking even on it was to put some work into it and at least get it closer to be a running car. So when My 55 Chevy and my son's 59 Mercury and the other summer vehicles went into winter storage we moved the 39 to the workshop to get started on it.
    First project on the list is to fix the rear window and roof damage that it had when we bought it. Seller said a tree had fallen on it. I have never tried fixing damage this bad before but figured I didn't have much to lose by giving it a try on this car.




    This is what it looked like when I started. Actually it was worse as I forgot to take a picture before I started, This was after I had pushed out the damage some.


    This was after some work on pushing on it with a bottle jack and then the ram from my engine hoist.


    Drivers side damage to work on yet.


    Getting it roughly back to shape. Throughout the process I used a rattle can primer to check progress by spraying a thin coat then sanding it off with a block to make it easier to seed where it needed more work.


    Looking much better but still a long way to go.




    A few more progress shots.




    More progress. At this point just doing a lot of hammer and dolly work to bump up the low spots and knock down the high spots combined with using a shrinking disc and a propane torch to shrink the areas of stretched metal.




    Slow but sure getting it a bit better.


    Looking halfway decent at this point, Should only take a thin coat of filler to look pretty good now. For sure much better than what I started with.
    More to come.
    Brian

  2. #2
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,339
    It looks great to me Brian.. certainly compared to what it did!

    I've loved 39 Fords all my life I think; coupes early, then came around to thinking 'sedans' when family came along! Good luck with the project... it would make a great companion to your '55...

  3. #3
    Registered Member Custer55's Avatar
    Join Date
    Feb 2015

    Member #:2442
    Location
    Custer, WI
    Posts
    504
    It looks great to me Brian.. certainly compared to what it did!

    I've loved 39 Fords all my life I think; coupes early, then came around to thinking 'sedans' when family came along! Good luck with the project... it would make a great companion to your '55...

    Thanks, Yep is sure is way better than what I started with.

  4. #4
    Registered Member busterwivell's Avatar
    Join Date
    Dec 2016

    Member #:3249
    Location
    Sahuarita (Tucson), AZ
    Posts
    610
    Nice work!
    I recently sold my 47 Chevy 2 door sedan project. Realized I'm probably too old to take on another huge project, and have plenty of fun with my 56 210, 66 Chevelle and 71 Chevy pickup.

  5. #5
    Registered Member Custer55's Avatar
    Join Date
    Feb 2015

    Member #:2442
    Location
    Custer, WI
    Posts
    504
    Quote Originally Posted by busterwivell View Post
    Nice work!
    I recently sold my 47 Chevy 2 door sedan project. Realized I'm probably too old to take on another huge project, and have plenty of fun with my 56 210, 66 Chevelle and 71 Chevy pickup.
    Thanks, the plan is to try to sell this one once i get it in better shape but we will see.

  6. #6
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,339
    It's looking very good Brian! You should feel good about what you are doing...

    When all this 'crap' is over and you have a nice shiny straight metal 39 Ford in your shop... you're going to feel even better..

  7. #7
    Registered Member Custer55's Avatar
    Join Date
    Feb 2015

    Member #:2442
    Location
    Custer, WI
    Posts
    504
    Quote Originally Posted by BamaNomad View Post
    It's looking very good Brian! You should feel good about what you are doing...

    When all this 'crap' is over and you have a nice shiny straight metal 39 Ford in your shop... you're going to feel even better..
    Thanks Gary,
    I'm pretty happy about how it is going so far. At least I know it will be better than it was when I started.
    Brian

  8. #8
    Administrator 567chevys's Avatar
    Join Date
    Oct 2010

    Member #:3
    Location
    Woodland Washington
    Posts
    2,334
    Looking good Brian ,
    Thanks for posting this on the site



    Sid

    1955 2 DR Post
    1937 Chevy Coupe
    2019 Ford Super Duty F350
    2018 Ford Explorer
    1955 Chevy Nomad
    1935 Ford 2dr Slant back I have 4

  9. #9
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,339
    Thanks Brian for saving an old 39 Ford.. Not so surprising to find a variety of old repairs on an 80 yr old car!

  10. #10
    Registered Member Custer55's Avatar
    Join Date
    Feb 2015

    Member #:2442
    Location
    Custer, WI
    Posts
    504
    Quote Originally Posted by BamaNomad View Post
    Thanks Brian for saving an old 39 Ford.. Not so surprising to find a variety of old repairs on an 80 yr old car!
    Thanks Gary,
    Yep, It would be a pretty rare 80 plus year old car if it didn't need any body work!!

Page 1 of 22 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •