Outstanding progress in 2021 Timo! You get my vote for member of the year on website, based on your overall project progress.
Kudos to you!
Onward to 2022. You'll be driving that tri5 soon.
1957 Nomad- LS1/T56 on C4 chassis
1959 Fleetside Apache 1/2 ton, shortbed, big window, 327ci.
You for sure get high marks in the quality of post department.
Little More progress today and yesterday.
Hi Timo,
Thanks for your posts as you continue your progress! Mid-January will be here quick - looking forward to seeing the painter's work.
Regards, Doug
Thank you very much! Yep i think mid january i have the car back from the painter, im now strugling with the rear brakes. I have the ford 9 rear with e brake and really soft pedal.
I think my piston is too far from the pads and disc and have to adjust those closer.
The manual says that i should remove the e brake lever nut and lever and put the nut back and rotate the nut until the piston comes out enough to make contact to the disc and pads.
Can i just rotate the piston instead of removing the lever and gasket from the e brake?
Im really strugling with my brakes. Front banjo bolts leak even when tightened really Hard.
Timo? Are you using copper washers?