Just joined? Please introduce yourself.
Page 13 of 32 FirstFirst ... 3111213141523 ... LastLast
Results 121 to 130 of 319

Thread: 1957 2d post starting soon

  1. #121
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    257
    They are allready minitubbed. The wheel came too close to the out side. I have 4" room to the chassis so i narrowed the rear to get those rims fit better and also the wheel Change is gonna be much easyer in the future. Im gonna narrow the rear 1 and 3/4 inch per side.

  2. #122
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    597
    You are ahead of the game! Nice.

  3. #123
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    257
    Quote Originally Posted by Belair-o View Post
    You are ahead of the game! Nice.
    Thanks!

  4. #124
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    257
    Got the rear yesterday from my Friend Who shortened the the whole thing. Today im gonna weld oil drain plug to that and spray epoxy and paint maybe.

  5. #125
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    257

  6. #126
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    257
    Learning how to paint

  7. #127
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    257
    I have made all the brake lines to the Master cylinder and the brackets for the brake hoses also. Rear axle was shortened about 40mm from each side and now the tire swap is possible with the Jack on the road if needed.

    I Asser assembled the fuel tank with the New pump and sender also, just need to wire all before installing the tank.

    Fuel lines are ready and the mainpower line is also ready and installed on the chassis.

    I bolted the fuel line in to the center of the body, i dont want to run it across the exhaust on any point

  8. #128
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    597
    Hi Timo,
    I guess you are getting close to setting the body back on the chassis? You keep movin' along!
    Regards, Doug

  9. #129
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    257
    Quote Originally Posted by Belair-o View Post
    Hi Timo,
    I guess you are getting close to setting the body back on the chassis? You keep movin' along!
    Regards, Doug
    Thanks! Yes im moving on, today bolted the whole front end back together and started mocking the 01 camaro radiator with the fan pack to its place. Yesterday i mocked the lokar shifter and also my emergenge e brake handle to the center console.

    Then i noticed that my camaro seats are too low, i need to raise them about 2" higher so a shorter person can drive it also

  10. #130
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    257
    Little More progres

Page 13 of 32 FirstFirst ... 3111213141523 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •