Just joined? Please introduce yourself.
Classic Edge Designs, LLC Prime Custom Cars, LLC MadMooks
Results 1 to 5 of 5

Thread: MARK M, ALTERNATOR MOUNTING BOLT

  1. #1
    Registered Member
    Join Date
    Jul 2020

    Member #:4421
    Location
    bethlehem, pa
    Posts
    143

    MARK M, ALTERNATOR MOUNTING BOLT

    hey, did`nt want to steal the thread about mounting the starter, so i started new. anyway, mark, you mentioned that dorman sells these knurled bolts. my alternator bracket, one that bolts on the number 1 header bolts, the 3/8 bolt is not snug in it, and a 7/16 is to big. so, maybe the knurled bolt would make up the little gap. does dorman sell all lengths or just the "kit" for starters? thanx!

  2. #2
    Registered Member
    Join Date
    May 2012

    Member #:625
    Posts
    2,678
    All I have ever seen is starter bolts in the Help line. If you have a swp and Accessory holes in heads why not use a 72 Chevy truck bracket/ 72 Corvette. A much better setup.
    Last edited by markm; 01-03-2021 at 09:54 AM.

  3. #3
    Registered Member
    Join Date
    Apr 2012

    Member #:571
    Posts
    4,362
    does dorman sell all lengths or just the "kit" for starters
    The bolts are only sold to fit starters - in the specific length needed for starters.

  4. #4
    Registered Member
    Join Date
    Jun 2015

    Member #:2579
    Posts
    166
    Could you open the hole up a little bit and go with the 7/16 bolt ?

  5. #5
    Registered Member
    Join Date
    Jul 2020

    Member #:4421
    Location
    bethlehem, pa
    Posts
    143
    ok, thanks guys, but no holes in the heads. if i drill it,i gotta drill the alt. also, and the bracket. anyway, went out and measured the bolt. same length as the starter bolt, get one this week.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •