Just joined? Please introduce yourself.
Results 1 to 4 of 4

Thread: VA/Raingear

  1. #1
    Registered Member Old Buzzard's Avatar
    Join Date
    Jan 2017

    Member #:3292
    Location
    Bostwick, Georgia
    Posts
    284

    Question VA/Raingear

    Am trying to head off a redo, when putting defrost in a VA Gen4 app.
    55 sedan, automatic, floor shift, with DBW pedal.
    I have the pedal mtd, a dummy Gen4, the RG, and a GM fuse panel, mtd toward outer side of the inner dr firewall.
    I also have the original def plenum.
    [The 2 plastic vents in the kit, leave a lot to be desired].
    Anyone have a trik way to use all 4 defroster vents?
    I have seen reports of the control slider assembly coming very close, or into the pedal assy.
    NE1 with that experience?

    TIA,

  2. #2
    Registered Member
    Join Date
    Apr 2012

    Member #:571
    Posts
    4,671
    I've never seen the 2 hole 56 plenum used with Raingear and VA, let alone the 4 hole 55 plenum. Frankly it looks hard for the gain involved.

    But if you figure it out, or find someone who did, please share.

  3. #3
    Registered Member Old Buzzard's Avatar
    Join Date
    Jan 2017

    Member #:3292
    Location
    Bostwick, Georgia
    Posts
    284
    I've got all the "stuff" installed, and am looking at some ideas for the outer runs.
    Center 2 are covered by the VA parts.

  4. #4
    Registered Member
    Join Date
    May 2012

    Member #:625
    Posts
    3,409
    My 55 has raingear with a stock deluxe heater, however I have no ac.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •