Just joined? Please introduce yourself.
Results 1 to 8 of 8

Thread: Speedo lube

  1. #1
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    597

    Speedo lube

    Hi,
    Does anyone know if for a 57 Chevy, the speedo has to be removed from the cluster to access the mini-freeze plug to lube the speedo drive?
    Thanks, Doug

  2. #2
    Registered Member chasracer's Avatar
    Join Date
    Mar 2018

    Member #:3718
    Location
    Montpelier
    Posts
    230
    It would be a lot easier than trying to do in the car. You have that tiny freeze plug and felt to remove to get lube into it - getting the plug out isn't bad but it doesn't just pop out for you.
    Remember the "13"


  3. #3
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    597
    Chasracer,
    Thanks for your thoughts on the process. I appreciate your bringing up unintended consequences that I had not considered. I was not wanting to totally pull the cluster, because of my historical difficulty in separating the AAW connectors, leading to the opportunity for me to cause paint scratches. I see your point.
    Thanks, Doug

  4. #4
    Registered Member Rocketman's Avatar
    Join Date
    Jul 2017

    Member #:3454
    Location
    Rowlett (DFW), TX
    Posts
    262
    It has been a long time since I did one but from what I remember you just unscrewed it from the back of the speedometer, pulled the cable out being careful to not get it on the upholstery and took a glob of lubriplate in a rag and ran the cable through it as you pushed it back in the housing. I may be wrong since the memory is the second thing to go. I don't remember what the first is.
    Glenn Hargrove

    USAF (66-70) Viet Nam Vet

  5. #5
    Registered Member chasracer's Avatar
    Join Date
    Mar 2018

    Member #:3718
    Location
    Montpelier
    Posts
    230
    Ha - yep I hear you!

    I think he's talking about lubing the actual speedometer head, the gears in it that clock the miles driven - not the speedometer cable itself.
    Remember the "13"


  6. #6
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    597
    Quote Originally Posted by chasracer View Post
    Ha - yep I hear you!

    I think he's talking about lubing the actual speedometer head, the gears in it that clock the miles driven - not the speedometer cable itself.
    Yes, you are correct, that is what I was talking about.

  7. #7
    Registered Member Rocketman's Avatar
    Join Date
    Jul 2017

    Member #:3454
    Location
    Rowlett (DFW), TX
    Posts
    262
    My apologies for reading it too fast. Your post was pretty clear. Good luck with this.
    Glenn Hargrove

    USAF (66-70) Viet Nam Vet

  8. #8
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    597
    I wanted to give feedback on the issue I had with the jumping speedo needle. I pulled the cluster, pulled the speedo from the cluster, removed the little brass plug from the back of the speedo. removed the wick, cleaned the speedo drive mechanism with Kroil thru the little hole the brass plug was in (turning the drive mechanism as I cleaned), cleaned the wick, used a bit of 3-in-1 oil in the hole and on the wick. I verified the speedo worked by chucking a small piece of wood in a drill and into the back of the speedo, running the drill counterclockwise. I put it all back together, pulling and lubing the speedo cable for the 3rd time, for good measure, and the speedo needle is no longer jumping around. I know, I turned two knobs at once, so which one did the trick? Since I had already lubed the speedo cable twice in the near past, I am of the mind that lubing the speedo head was the cure.
    Thanks for your input, Doug

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •