Just joined? Please introduce yourself.
Results 1 to 4 of 4

Thread: New Member from CA

  1. #1
    Registered Member
    Join Date
    Mar 2022

    Member #:4872
    Location
    Modesto CA
    Posts
    4

    New Member from CA

    Hello all. My name is Don and I have just started a 1955 GMC truck project. There is lots of work to do. The truck has a 2nd gen Carmaro sub-frame, 2004 chevy 5.3 ls engine, t400 transmission, and 80's Carmaro rear end. All was installed by previous owner. I'll be asking lots of questions and looking for advice on how to make major these components work together. Happy to be here!
    Don

  2. #2
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,382
    Good to have you here Don.... show us some photos of your GMC? I got the feeling that the prior owner installed the major driveline components, but didn't finish up the installs or the truck? Right or wrong? Photos will tell us a lot, and if you have specific questions, ask them here! Good luck on your Gemmie..
    Gary
    Last edited by BamaNomad; 03-15-2022 at 02:49 PM.

  3. #3
    Registered Member
    Join Date
    Mar 2022

    Member #:4872
    Location
    Modesto CA
    Posts
    4
    You are correct, engine, trans and rear end in. no drive shaft yet. Need to decide on exhaust, shifter, master brake location, wiring, and body work. I's quite a project and I will need lots of advice and suggestions. Thanks for you note.
    Don

  4. #4
    Registered Member busterwivell's Avatar
    Join Date
    Dec 2016

    Member #:3249
    Location
    Sahuarita (Tucson), AZ
    Posts
    620
    Sounds like an interesting project Don. I look forward to watching your build. Where in California are you? I'll be at the Good Guys show in Del Mar on the 1st and 2nd of April. Maybe we could hook up there?
    Bill

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •