Just joined? Please introduce yourself.
Results 1 to 5 of 5

Thread: Body filler in high heat location

  1. #1
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    496

    Body filler in high heat location

    Howdy,
    Asking for a friend: after welding in some patches in a firewall, do you see any issues in using body filler to fill some of the irregularities (high heat location)? I see Evercoat Rage is listed with a max temp of 260 (deg. F).
    Thanks, Doug

  2. #2
    Registered Member Tabasco's Avatar
    Join Date
    May 2012

    Member #:615
    Location
    Poolville, Texas
    Posts
    350
    I used body filer to fill dents on the top tank of the radiator on my '57. I had no problems with it. I don't think it would be a problem on a firewall.

  3. #3
    Registered Member
    Join Date
    May 2012

    Member #:625
    Posts
    3,333
    If I was woried about it I might use All-Metal.

  4. #4
    Registered Member busterwivell's Avatar
    Join Date
    Dec 2016

    Member #:3249
    Location
    Sahuarita (Tucson), AZ
    Posts
    642
    I did it on a car I built back in the 90's. Thin coat, not major build up. It was still fine when I sold the car about 10 years later.

  5. #5
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    496
    Thanks fellers - I will let my buddy know.
    Thanks, Doug

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •