Just joined? Please introduce yourself.
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Tell us about your project(s)...

  1. #11
    Registered Member WagonCrazy's Avatar
    Join Date
    Mar 2012

    Member #:530
    Location
    Santa Clarita, CA
    Posts
    1,551
    I have done absolutely NOTHING more with my Nomad build. I drive it locally but still need to continue on with the interior buildout in preparation for (eventually) custom upholstery. Been swamped with 2 hour drives (each way) out to my Dads place to clean it out and prep for selling it. We're finally there, and next week I'll have the last trip to empty the place out and "get 'er sold". Sometimes life just deals you events where you have to focus elsewhere for a time, in order to get thru what needs to be done.

    in the mean time, the car is paid for, sitting here my a secure garage, running, and I can hop in it and go for a cruise if need be for regaining my sanity.

    Looking back on all the years I've been at this old car hobby, the best advice I've gotten from other guys is "get it running, keep it running, drive it". It ain't fun when they're dismantled and parked forever....

    Carry on guys!
    Last edited by WagonCrazy; 06-17-2022 at 05:30 AM.
    1957 Nomad- LS1/T56 on C4 chassis
    1959 Fleetside Apache 1/2 ton, shortbed, big window, 327ci.

  2. #12
    Registered Member
    Join Date
    May 2012

    Member #:625
    Posts
    3,301
    I just got finished swapping out a perfectly good 69 model 300hp 4 bolt 350 with 68 2.02/1.60 camel humps and an L-79 cam for a 63 model 327 with Trick Flow aluminum DHC175 heads and a updated version of the 350hp cam. I also swapped the intake for a new Eldebrock 3x2 to replace the very old Offy 3x2. I retained the 57 Olds J2 carbs.

  3. #13
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    219
    Just got my car from the paint. Put new rims on and installed raingear system. Trunk subwoofers also in place and air tank and compressor. Nesteiden is the exterior trim

  4. #14
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,385
    TIMO??? New paint? and No photos or video? we need pictures!

  5. #15
    Registered Member
    Join Date
    Jul 2020

    Member #:4460
    Posts
    219
    Gonna post new video shortly

  6. #16
    Registered Member 210Chevy's Avatar
    Join Date
    Oct 2021

    Member #:4767
    Location
    Limestone, TN.
    Posts
    54
    Can someone please tell me about the pictures for this site, everytime I attach/upload pictures they are to large any help greatly appreciated.
    24 Year Army Vet ... Very Proud of It...

    Thank You!
    William

  7. #17
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    476
    Hi William,
    Not sure this will help, but when I was first going to post a pic, it looked ginormous in the preview. When I finally went ahead and posted, the pic resized to a reasonable size. May not be your issue, but have you tried to complete a post with a pic? If not, you might want to give it a go.
    Regards, Doug

  8. #18
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,385
    William,

    If you are using your 'phone camera', the images re probably too large for posting or displaying over the internet. I'd suggest the following:
    1) Your camera probably has a parameter to control/set the resolution. The highest resolution is not necessary nor even desired. You should be generating a 'jpg' or 'jpeg' compressed file which will help, but you should also select your horizontal and vertical pixel size of your images to no more than 1000 x 800, and even 600 x 400 will look very nice on our monitors.

    2) If your camera doesn't have any means of resolution control, then download and use a software tool to reduce the image size in pixels (or file size in Kbytes). The software tool I use is "Light Image Resizer' which gives you total control of your image size in pixels, and/or your image file size in Kbytes. It's a free download and works great.

    Generally an image FILE size of 150-300 Kbytes works well if the image is jpeg compressed.

    PS. There are a couple of means to insert a photo into your posting, but the simplest and the one I use most of the time is 'Insert Image'... towards the right side of the tools menu above your message window.

Page 2 of 2 FirstFirst 12

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •