Just joined? Please introduce yourself.
Results 1 to 3 of 3

Thread: Right stuff brake conversion kit

  1. #1
    Registered Member
    Join Date
    May 2022

    Member #:4916
    Location
    Hampton, SC
    Posts
    12

    Right stuff brake conversion kit

    I have a stock 55 4d 210. I purchased a conversion kit from Right Stuff to put manual disk on front and drums on the back. I have talked with their tec folks several times and they have tried to help me but have not been able to answer my question. When i install the new caliper bracket on the spindle the lower bolt goes through the spindle then through the new caliper bracket and then through the steering knuckle arm. But the new caliper bracket only bolts to one side of the steering knuckle arm thus creating a larger gap on one side of the steering knuckle arm. Right stuff tells me a 55 should not need a spacer. But unless i am missing something i do not see how you can add the caliper bracket width on one side and not need a spacer for the other. Hopefully someone else has added a kit and can help me out. thanks

  2. #2
    Registered Member Belair-o's Avatar
    Join Date
    Jun 2013

    Member #:1723
    Location
    Franktown, CO
    Posts
    597
    Hi PastorJ,
    Sorry, haven't dealt with Right Stuff, so can't help, but will bump your post up.
    Regards, Doug

  3. #3
    Registered Member Old Buzzard's Avatar
    Join Date
    Jan 2017

    Member #:3292
    Location
    Bostwick, Georgia
    Posts
    284
    Pictures help.
    Injector inspector
    Walmart hottie stalker.
    USAF 60-64.
    The guys that brought you the Cuban missile crisis in living color!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •