Just joined? Please introduce yourself.
Results 1 to 4 of 4

Thread: Quarter glass

  1. #1
    Registered Member
    Join Date
    Feb 2021

    Member #:4624
    Posts
    4

    Quarter glass

    Have 2 dr sedan quarter glass is out of track … can’t seem to re fit? Can I just urethane it to the track? Or? Thanks

  2. #2
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,774
    Did you try the setting tape? Is the glass the correct thickness?

  3. #3
    Registered Member busterwivell's Avatar
    Join Date
    Dec 2016

    Member #:3249
    Location
    Sahuarita (Tucson), AZ
    Posts
    768
    Like Gary said, get the tape used to install the glass.
    Clean out the track, glean the glass, put the tape on the glass and use a small rubber hammer to gently tap the track back on to the glass.
    Bill

  4. #4
    Registered Member BamaNomad's Avatar
    Join Date
    Nov 2016

    Member #:3217
    Location
    Rocket City, USA (Huntsville, AL area)
    Posts
    3,774
    you 'wet' the tape when installing to help it slide in, when it dries it 'locks' it in place. Some use 'windex' and others use 'oil' to wet the tape...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •