-
Quarter glass
Have 2 dr sedan quarter glass is out of track … can’t seem to re fit? Can I just urethane it to the track? Or? Thanks
-
Registered Member
Did you try the setting tape? Is the glass the correct thickness?
-
Registered Member
Like Gary said, get the tape used to install the glass.
Clean out the track, glean the glass, put the tape on the glass and use a small rubber hammer to gently tap the track back on to the glass.
Bill
-
Registered Member
you 'wet' the tape when installing to help it slide in, when it dries it 'locks' it in place. Some use 'windex' and others use 'oil' to wet the tape...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules