-
I alway thought you wanted 2-4 degrees neg. on pinion angle
-
I mean that the yoke is up towards the floor board.
-
Registered Member
If you are using the Same rear leaf springs/mounting plates for the new rear as the original, then I'd suggest measuring the pinion angle relative to the spring mounts on the old rear, and installing the mounts on the new rear at the same angle...That's what I did when I installed a '70's 8.5" 10 bolt in my Nomad...
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules