55 sedan.
It appears that the moron that put the new 1/4's on my sedan, has managed to get the openings turned in toward the trunk opening.
Being the t/l hsgs interchange left and right, I'm assuming the openings should be "straight across" with the inner, and outer edges all lining up. I've pulled a string line across the vertical edges, and the inside of the openings do not hit the string, on either side.
It appears he's aggravated the situation by using the entire patch panel, that goes up from the tail pan. There was no need to use all of them. The rust stopped 8/10" below the top of the 1/4. It may be that those panels are not correct, and are the root of the problem. Not sure.
If there's someone with the lights out , could you do the string line check, and let me know if I'm on the right track.
I've pulled the car out of his shop, and can post pics, if needed.
TIA,