door shells 4dr 9 passenger wagon

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 57barnwagon
    Registered Member
    • Feb 2015
    • 120

    door shells 4dr 9 passenger wagon

    any experience and opinion on complete door shells for my wagon. the lower inside of the door is pretty rusty and cant seem to locate door lowers for 4 door.
  • BamaNomad
    Registered Member
    • Nov 2016
    • 3877

    #2
    I assume you mean by 'rusty' that there are holes? If it's just surface rust, then derust, prep, and paint. If there are rust holes too large to repair, then it's probably easier to find good complete doors than to find 'repair panels' (for a 4-door). There were more 4-door trifives built than any other model. I'd bet there are good 4-door doors very close to you for not a big price..

    Which door do you need?

    Comment

    • Rick_L
      Registered Member
      • Apr 2012
      • 4675

      #3
      Sedan and wagon front doors are the same.

      But wagon rear doors aren't the same as sedan doors - so that means they are not as plentiful.

      Comment

      • BamaNomad
        Registered Member
        • Nov 2016
        • 3877

        #4
        Originally posted by Rick_L
        Sedan and wagon front doors are the same.

        But wagon rear doors aren't the same as sedan doors - so that means they are not as plentiful.
        Good points Rick... I did not know that the rear doors were different between sedans and wagons.

        Comment

        • Rick_L
          Registered Member
          • Apr 2012
          • 4675

          #5
          Wagon rear doors are straight or nearly so across the top, sedan doors slope toward the back across the top.

          Comment

          • MP&C
            Registered Member
            • Dec 2013
            • 1302

            #6
            If you are looking for the outside skin, what's the chance of using a replacement skin for a front door and trim to fit / tip new flanges...
            Robert



            MP&C Shop Projects-Metalshaping Tutorials


            Instagram @ mccartney_paint_and_custom


            .

            Comment

            • 57barnwagon
              Registered Member
              • Feb 2015
              • 120

              #7
              I also need to replace an area near the wiper on the cowl. Is a patch panel readily made for this?

              Comment

              Working...